| T O P I C R E V I E W |
| Pekka Ritamaki |
Posted - 01/10/2020 : 03:58:56
I have a GQ-4X True USB Universal Programmer question.
I have a 8051 adapter.
A new circuit is Philips NXP P87C51SBPN PPV programming voltage 12.75V
A new program is updated, with Philips added
A device ID check tells that Intel 8751 circuit is 8951 circuit, type unknown.
Should I leave ID check off?
Writing do not success to NXP P87C51SBPN circuit, it starts, but stops after 1000 addresses.
Regards
Pekka Ritamaki
Image Insert:
115855 bytes |
| 3 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 01/14/2020 : 05:30:49
quote:
Originally posted by laptech
You should be using ADP-015 https://www.mcumall.com/store/index.php?route=product/product&path=62&product_id=58 because other adapters might not work.
You think his adapter is not right? |
| laptech |
Posted - 01/14/2020 : 02:32:58
You should be using ADP-015 https://www.mcumall.com/store/index.php?route=product/product&path=62&product_id=58 because other adapters might not work. |
| anniel |
Posted - 01/10/2020 : 05:30:39
quote:
Originally posted by Pekka Ritamaki
I have a GQ-4X True USB Universal Programmer question.
I have a 8051 adapter.
A new circuit is Philips NXP P87C51SBPN PPV programming voltage 12.75V
A new program is updated, with Philips added
A device ID check tells that Intel 8751 circuit is 8951 circuit, type unknown.
Should I leave ID check off?
Writing do not success to NXP P87C51SBPN circuit, it starts, but stops after 1000 addresses.
Regards
Pekka Ritamaki
Image Insert:
115855 bytes
If ID is incorrect you probably have a fake chip.
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8418 |
