| T O P I C R E V I E W |
| DsB_79 |
Posted - 05/31/2013 : 12:44:09
Hi, i have a Winbond W39L040P-90B to program.
How can i accomplish that, i am asking this because, i cannot do it with ADP-005 + GQ-4X.
The device that i chose is, the W39L040P.
Every time, that i check the ID, gives me a different one, don't know why.
The bios chip has remove from DFI board.
Can someone help?
Regards, |
| 3 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 06/17/2013 : 16:01:19
It may be related to chip itself.
Try:
1. another USB cable.
2. another computer.
3. another same chip.
|
| DsB_79 |
Posted - 06/11/2013 : 13:31:52
Hi, ZLM the pins contacts from the adapter and chip are ok.
Why when i check the id of the chip gives me different values? |
| ZLM |
Posted - 06/03/2013 : 09:09:10
check all pin contacts between chip and adapter, adapter and programmer. |
|
|
