| T O P I C R E V I E W |
| BackON |
Posted - 10/14/2015 : 10:12:22
hello
how i can read this chip with GQ-4x? Thanks |
| 3 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 10/27/2015 : 13:14:21
If the wires too long, it does not read the chip correctly.
Try to use shortest wires between the programmer ZIF and your chip. The shorter the better. The SPI uses high frequency communication protocol, so it is very sensitive to the length of wires. |
| BackON |
Posted - 10/24/2015 : 13:31:43
the adp-098 its necesary? because im tryong to read the chip with pomona 5252 and pinned to thre programmer but doesnt read anything
thanks |
| ZLM |
Posted - 10/14/2015 : 10:25:50
Add following line:
Name="S25FL064*SOIC16 ",ID="010216",Class="W25X10",Category="SERIAL_EPROM",MFG="Spansion",Vcc="3.6V",CodeSize="8388608",Adapter="ADP-098 adapter";
|
|
|
