| T O P I C R E V I E W |
| TimP |
Posted - 04/17/2016 : 15:41:35
Having some real issues with my programmer - worked fine up until recently.
It will do any of the following:
1) Not recognize the programmer when connected.
2) message saying the programmer is busy
3) software locks up
Not a "pirate" unit as I bought it directly from MCUmall
Have removed and reinstalled both the driver and GQ Programmer software.
Any ideas?
|
| 15 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 06/18/2019 : 03:26:11
quote:
Originally posted by bersch8688
have anyone Solution
Same problem here
Just redo the solder joints if it's the same problem or change the jack if contacts are used or broken. |
| bersch8688 |
Posted - 06/17/2019 : 22:49:37
have anyone Solution
Same problem here |
| anniel |
Posted - 05/09/2019 : 08:48:25
quote:
Originally posted by voodoop
Not yet .
That would be your next step to have a look at the solder joints of the USB. |
| voodoop |
Posted - 05/09/2019 : 06:59:54
Not yet . |
| anniel |
Posted - 05/09/2019 : 06:41:40
quote:
Originally posted by voodoop
That's why I said that a solution must be given .
Did you open it up? |
| voodoop |
Posted - 05/09/2019 : 05:57:29
That's why I said that a solution must be given . |
| anniel |
Posted - 05/09/2019 : 04:19:39
quote:
Originally posted by voodoop
quote:
Originally posted by anniel
quote:
Originally posted by voodoop
I have the same problem .
I see that there are many with this problem .
A resolution must be given .
You tried all the solutions?
New cables , new ports , new computers , old and new drivers .
It must be your programmer then. |
| voodoop |
Posted - 05/09/2019 : 04:14:17
quote:
Originally posted by anniel
quote:
Originally posted by voodoop
I have the same problem .
I see that there are many with this problem .
A resolution must be given .
You tried all the solutions?
New cables , new ports , new computers , old and new drivers . |
| anniel |
Posted - 05/09/2019 : 02:50:15
quote:
Originally posted by voodoop
I have the same problem .
I see that there are many with this problem .
A resolution must be given .
You tried all the solutions? |
| voodoop |
Posted - 05/08/2019 : 23:56:34
I have the same problem .
I see that there are many with this problem .
A resolution must be given . |
| ZLM |
Posted - 05/17/2016 : 07:30:58
Always buy genuine version programmer. |
| ZLM |
Posted - 05/05/2016 : 22:58:39
Try on another computer, if the problem still there, then something is wrong with the programmer. |
| TimP |
Posted - 05/05/2016 : 04:28:16
Hi,
Yes, also tried a different USB cable and I get a similar response. :(
|
| ZLM |
Posted - 04/18/2016 : 06:50:09
USB cable? |
| TimP |
Posted - 04/17/2016 : 15:43:08
Just to add, it will eventually work - but it is getting harder and hard to get to the point of it working.
Different USB ports tried as well. |
