| T O P I C R E V I E W |
| mirando |
Posted - 04/23/2016 : 10:40:01
Good day, community.
I have true usb willem programmer GQ-4x and ADP-019 adaptor. 
I bought it 2 days ago and i think it's v1. Does it?
Well i decided to read 29F800BB chip. Programmer successfully read ID and binary. When i looked through the dump i found out that it has two identical halves splited at 0x80000, i.e. 0x0-0x80000 and 0x80000-0xFFFFF are identical. People said me it's impossible and dump is wrong. There should be another code at first half.
So the question is: may old version adapter cause this issue? Again, reading ID and reading dump procedures passed successfully. What are the differences between v1 and v2 adapters?
|
| 6 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 04/25/2016 : 14:21:40
My pleasure! |
| mirando |
Posted - 04/25/2016 : 12:52:51
quote:
Originally posted by anniel
No only the address lines are connected and the two A19 together.
Thank you again! That works! |
| anniel |
Posted - 04/25/2016 : 09:59:39
No only the address lines are connected and the two A19 together. |
| mirando |
Posted - 04/24/2016 : 20:29:08
quote:
Originally posted by anniel
ZIF 40 PINOUT
Thank you a lot, anniel! This helps a lot!
As Ican see there are a CLK, P1 and doubled A19 pins on the ADP-019v1 board. Should they be connected somwhere? |
| anniel |
Posted - 04/24/2016 : 15:00:10
 |
| mirando |
Posted - 04/24/2016 : 11:47:31
Answering my own question YES, IT DOES. Because using ADP-019v1 with GQ-4x u must have also ADP-053. Maybe that will help others too.
Second question is: Can anyone share the correct pinout of it (ADP-053)? Looks pretty simple and too cheap but I can't wait a lot (month or two for delivery).
I have already seen it somewhere at this forum already, but can not find it again..
Any hints and tips are extremely appreciated.
Best regards! |
