MCUmall EPROM BIOS Chip Burner Forum

MCUmall EPROM BIOS Chip Burner Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

MCUmall Forums

True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)

GQ-4X and ADP-054 no longer working

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

[quote][i]Originally posted by sammargh[/i]
[br]My ADP-054 was working fine earlier today however now it refuses to get past 3% on 27C400 it's always the same address and the write is off by 8. I am using a power supply with the GQ-4X and as stated it worked earlier today, I was able to program about 24 chips without issue. Blank checking works fine but writing does not.

Some examples:
Chip is blank 
ID check skipped
Writing... Buffer
Elapsed time: 2.34 seconds.
Write failed, Address=0x00402D, Buffer=0xEB Device=0xE3
Write failed

And with a smaller chip - HN27C4096

Write failed, Address=0x00000B, Buffer=0x88 Device=0x80
Write failed
Different file but HN27C4096
Write failed, Address=0x000003, Buffer=0x0B Device=0x03
Write failed

I know it isn't the chips because I tried almost 20 different 27C400 and all failed at the same exact address writing after passing a blank check. I was able to program the HN27C4096 with my cheap chinese TL866 fine.

Any ideas what may be going on? J1 is set to the first position.

[/quote]

Insert an Image File
Check here to include your profile signature.

T O P I C R E V I E W
sammargh	Posted - 03/19/2018 : 16:03:48 My ADP-054 was working fine earlier today however now it refuses to get past 3% on 27C400 it's always the same address and the write is off by 8. I am using a power supply with the GQ-4X and as stated it worked earlier today, I was able to program about 24 chips without issue. Blank checking works fine but writing does not. Some examples: Chip is blank ID check skipped Writing... Buffer Elapsed time: 2.34 seconds. Write failed, Address=0x00402D, Buffer=0xEB Device=0xE3 Write failed And with a smaller chip - HN27C4096 Write failed, Address=0x00000B, Buffer=0x88 Device=0x80 Write failed Different file but HN27C4096 Write failed, Address=0x000003, Buffer=0x0B Device=0x03 Write failed I know it isn't the chips because I tried almost 20 different 27C400 and all failed at the same exact address writing after passing a blank check. I was able to program the HN27C4096 with my cheap chinese TL866 fine. Any ideas what may be going on? J1 is set to the first position.
1 L A T E S T R E P L I E S (Newest First)
anniel	Posted - 03/21/2018 : 04:18:11 quote: Originally posted by sammargh My ADP-054 was working fine earlier today however now it refuses to get past 3% on 27C400 it's always the same address and the write is off by 8. I am using a power supply with the GQ-4X and as stated it worked earlier today, I was able to program about 24 chips without issue. Blank checking works fine but writing does not. Some examples: Chip is blank ID check skipped Writing... Buffer Elapsed time: 2.34 seconds. Write failed, Address=0x00402D, Buffer=0xEB Device=0xE3 Write failed And with a smaller chip - HN27C4096 Write failed, Address=0x00000B, Buffer=0x88 Device=0x80 Write failed Different file but HN27C4096 Write failed, Address=0x000003, Buffer=0x0B Device=0x03 Write failed I know it isn't the chips because I tried almost 20 different 27C400 and all failed at the same exact address writing after passing a blank check. I was able to program the HN27C4096 with my cheap chinese TL866 fine. Any ideas what may be going on? J1 is set to the first position. Defective or dirty socket?

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.04 sec.

Snitz Forums 2000