MCUmall EPROM BIOS Chip Burner Forum

MCUmall EPROM BIOS Chip Burner Forum

All Forums

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Insert an Image File
Check here to include your profile signature.

T O P I C R E V I E W
JLaw	Posted - 06/02/2018 : 19:29:30 Does the GQ-4X (Re-2.20) support TC58NVG3S0FTA00 (TSOP-48)? If yes, then what adapter is needed? If no, then programmer suggestions? h**p://www.alldatasheet.com/view.jsp?Searchword=TC58NVG3S0FTA00
4 L A T E S T R E P L I E S (Newest First)
anniel	Posted - 06/20/2018 : 03:37:05 quote: Originally posted by laptech This is the adapter you would have needed for the GQ http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3102 You are correct.
laptech	Posted - 06/13/2018 : 06:18:36 This is the adapter you would have needed for the GQ http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3102
JLaw	Posted - 06/06/2018 : 13:32:40 I purchased a FlashcatUSB xPort, with a TSOP48 (Type-B) adapter for about $50. I suspect it will be a bit slow, but it should get the job done. Also, presales support from Embedded Computers was excellent. h**p://www.embeddedcomputers.net/products/FlashcatUSB_xPort/
JLaw	Posted - 06/04/2018 : 19:28:32 Here's a pic of the chip: Image Insert: 26869 bytes If support for this chip is unknown, but possible, then which adapter would it be best to try with?

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.04 sec.