MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 ICSP Wiring
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

salvo1205

3 Posts

Posted - 11/30/2008 :  08:56:30  Show Profile
Can anyone help me connect my PIC16F690 to USB PIC Programmer that I just bought from MCU using ICSP? Do I just hardwire everything to the PIC on a breadboard and not using the ZIF slot? If yes, where do I connect LOW, Vpp and Vcc? Is Vcc the Positive supply and Vpp the negative?
Reply #1

ZLM

2945 Posts

Posted - 11/30/2008 :  10:52:40  Show Profile
First, the software need to set to the ICSP mode.

The ICSP is designed for programming the chip in circuit. So, if you have the target board with the ICSP header on it, then you can connect the ICSP headers between target board and the programmer.

If you do not have the target board, then you can connect the ICSP directly to the chip. OR you can use a universal adapter to do this.

The ICSP header pin out:

GND --- 0V negtive to chip pin 20 VSS
VCC --- 5V positive to chip pin 1 VDD
VPP --- 12V positive to chip pin 4 Vpp
CLK --- 0V Clock pin to chip pin 18 ICSPCLK
DAT --- 0V Data pin to chip pin 19 ICSPDAT

LOW ---- ignore this pin

Image Insert:
Go to Top of Page
Reply #2

salvo1205

3 Posts

Posted - 11/30/2008 :  14:21:44  Show Profile
Thanks, I'll try it out!!!
Go to Top of Page
Reply #3

salvo1205

3 Posts

Posted - 11/30/2008 :  15:31:53  Show Profile
It finally worked! Thanks a lot for your help!!!
Go to Top of Page
Reply #4

Chiptuner

Ukraine
1 Posts

Posted - 09/06/2013 :  13:37:29  Show Profile
What is the need for the programmer adapter USB PRO GQ-4X, which is programmed to PIC16F690

Chiptuning, DPF,FAP,EGR - Off www.chiptuner.dp.ua
Go to Top of Page
Reply #5

rsvalley

China
5 Posts

Posted - 10/30/2013 :  17:56:06  Show Profile
yes!
follow these process. I get success at last.
Thank you very much!
www.rsvalley.com/
Go to Top of Page
Reply #6

fade

China
3 Posts

Posted - 03/13/2016 :  22:48:18  Show Profile
When I through a Web site I found something in the last night£¬the something are weapons.The weapons are pretty cool that I want buy it.And the price I can accept£¬so I buy lots of weapons that I love£¬and when I need some weapons again£¬I will come here to buy again in the first time¡£Click at www.csgo4sale.com.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000