MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 AM29F200BB using GQ4X and new adaptor		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Yaser Jafar

Canada
3 Posts
Posted - 05/29/2016 :  18:35:02  Show Profile  Reply with Quote
I set it for AM29 and 5V, then I read, and I get all FFs.

Any idea?
Reply #1

stevocz

Slovakia
27 Posts
Posted - 05/30/2016 :  04:35:28  Show Profile  Reply with Quote
you chip/adapter has wrong orientation or chip has bad connection between pins and adapter.

chip ID is read correct?
gq-4x4, gq-4x, willem usb/lpt
Edited by - stevocz on 05/30/2016 22:09:27
Go to Top of Page
Reply #2

Yaser Jafar

Canada
3 Posts
Posted - 05/30/2016 :  16:01:48  Show Profile  Reply with Quote
No, chip ID not read correctly. FFFF ID
Go to Top of Page
Reply #3

anniel

2572 Posts
Posted - 05/30/2016 :  16:09:57  Show Profile  Reply with Quote
Bad contact or bad chip. Is the chip from a working unit?
Go to Top of Page
Reply #4

Yaser Jafar

Canada
3 Posts
Posted - 05/30/2016 :  17:34:26  Show Profile  Reply with Quote
Yes from a working Transmission Control Unit from BMW.

Would the programmer erase the code in the unit if no contact?
Go to Top of Page
Reply #5

stevocz

Slovakia
27 Posts
Posted - 05/30/2016 :  22:17:54  Show Profile  Reply with Quote
yes, it can erase but not all data (only data where pin has correct connection).

Do you have right orientation (pin1 of chip to pin1 of adapter?)
Try a little bend the pins. Chip ID must be correctly readed.
gq-4x4, gq-4x, willem usb/lpt
Edited by - stevocz on 05/30/2016 22:23:14
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000