MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X and PIC12F629 - CFG verify fails		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Ziggy587

USA
21 Posts
Posted - 08/14/2016 :  07:06:29  Show Profile  Reply with Quote
Hello,

I am trying to write to PIC12F629. I have three brand new chips. They ID check OK and blank check OK, but they all fail to verify the configuration.

Software/hardware/driver version and error message:
h**p://i59.photobucket.com/albums/g295/Ziggy587/CFG%20Verify%20Failed_zpskcbwy0zl.jpg

Configuration tab (Hex File):
h**p://i59.photobucket.com/albums/g295/Ziggy587/Hex_zpslpupsx7k.jpg

Configuration tab (Read from device):
h**p://i59.photobucket.com/albums/g295/Ziggy587/Read%20from%20Device_zpsw41dkjy6.jpg

(I would have uploaded the pics to the forum directly but was having trouble)
Reply #1

ZLM

2945 Posts
Posted - 08/16/2016 :  19:37:04  Show Profile  Reply with Quote
It seems the hex file configuration is not right. It is trying to change the reserved CFG bit.

From this chip datasheet, the Band Gap Calibration bits must be read and preserved.

So, do not use the CFG from your hex file.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000