MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 mx29lv008cbtc		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ingrds

Venezuela
15 Posts
Posted - 10/07/2008 :  08:48:31  Show Profile  Reply with Quote
helllo i have GQ-3x rev1.0 how i can update it and need programmer mx29lv008cbtc
Reply #1

ZLM

2945 Posts
Posted - 10/07/2008 :  15:10:05  Show Profile  Reply with Quote
This chip should be supported on gQ-3X.
Try to add following two lines into devices.txt

Name="MX29LV008B",ID="C237",Class="29LV800B",Category="FLASH",MFG="Macronix",Adapter="TSOP40A
adapter",VCC="3.6V",Message="Set the adapter to 5V jumper position. And connect A19 from adapter to programmer";
Name="MX29LV008T,ID="C23E,Class="29LV800T,Category="FLASH",MFG="Macronix",Adapter="TSOP40A
adapter",VCC="3.6V",Message="Set the adapter to 5V jumper position. And connect A19 from adapter to programmer";
Go to Top of Page
Reply #2

F-bone

30 Posts
Posted - 09/05/2016 :  10:13:18  Show Profile  Reply with Quote
Hi,

I also need to program this chip with GQ-4X (older model). Is this adapter the right one?

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4418

br
george
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 09/05/2016 :  20:48:48  Show Profile  Reply with Quote
Yes. You also need an ADP-077 top ZIF socket.
Go to Top of Page
Reply #4

F-bone

30 Posts
Posted - 09/07/2016 :  01:10:24  Show Profile  Reply with Quote
apologies for this following dumb question.. I need both adapters?
Go to Top of Page
Reply #5

anniel

2572 Posts
Posted - 09/07/2016 :  02:35:33  Show Profile  Reply with Quote
Yes
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000