MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Psop56 adapter problems just bought		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

dave11674

United Kingdom
1 Posts
Posted - 12/09/2016 :  06:05:13  Show Profile  Reply with Quote
Hi i just got ADP-100
And ADP-103

GQ-4X programmer owned

I have 2 x 29BL802CB

neither will ID or read any data

Software says enable 3.6v on adapter
But i have no jumpers on my adapters !

Can anyone help

Thanks

Dave
Reply #1

ZLM

2945 Posts
Posted - 12/11/2016 :  18:31:22  Show Profile  Reply with Quote
The default jumper is on 3.6V. You do not need to set anything..

The adapter has been tested before it shipped. So, it should not be the adapter problem.

Check your chip orientation in ZIF socket. The chip pin 1 should be at the upper left.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000