MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Error with W49F002U all TopWin English :(		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Macgaiver

10 Posts
Posted - 11/14/2006 :  20:39:38  Show Profile
Hello, I hope somebody has a solution for this problem.
When trying to program the component Winbond 49F002U with TopWin English v2.33.
when arriving in the address 6000 i get a error :(
if I use TopWin v2.29 Chinesen with the same component it records with totality. Because?
I tested with other versions this is the only that it records this component is TopWin Chinese v2.29;)

Some idea of when they will be solved this? My tape recorder is a TOP2048;)

Thankful!

Here my image for TopWin 2.33


And here the correct record ;)
Edited by - Macgaiver on 05/07/2007 15:56:35
Reply #1

nunovti

9 Posts
Posted - 12/11/2006 :  22:11:10  Show Profile
can u give that version? i'm having similar problems
Go to Top of Page
Reply #2

Macgaiver

10 Posts
Posted - 04/09/2007 :  06:35:39  Show Profile
quote:
Originally posted by nunovti

can u give that version? i'm having similar problems



Today it is day 09/04/07, the version of the TopWin English or Chinese
is in v2.35, and so far the problem continues in the same way and
without solution: (
Edited by - Macgaiver on 05/07/2007 15:56:57
Go to Top of Page
Reply #3

nunovti

9 Posts
Posted - 04/15/2007 :  11:16:57  Show Profile
posta a versao 2.29
Go to Top of Page
Reply #4

Macgaiver

10 Posts
Posted - 04/25/2007 :  16:26:11  Show Profile
Opa você ainda que a versão 2.29 ?
Go to Top of Page
Reply #5

homebrew05

4 Posts
Posted - 05/06/2007 :  21:56:17  Show Profile
I found your Topics of problems with TOP2048 for
W49F002U.

Has the problem been solved already?

I am having similar problems with TOP2048 for W49F002U.
It works Fine in Chinese version software only,
It has problem in writing process using any English version.

>it records this component is TopWin "Korea" v2.29,
you wrote.

I would like to replace the description "Korea" with Chinese.

If that problem has been solved already,
Please advise some ideas,
Go to Top of Page
Reply #6

Macgaiver

10 Posts
Posted - 05/07/2007 :  14:59:34  Show Profile
Unhappyly it was still not solved in the current versions.
In case v2.37 in my case

Still I follow the use of program in "Chinese" version 2.29 ;)
Sure!!
Edited by - Macgaiver on 05/07/2007 16:03:12
Go to Top of Page
Reply #7

homebrew05

4 Posts
Posted - 05/07/2007 :  16:26:42  Show Profile
Thank you for your reply.
So If the copyright is permitted or within a copyright I will try to convert it from chinese .EXE to English .EXE with Difficult wall in my poor skill .

I began to think that manufacturing should improve this problem early.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000