MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Unable to write to MB8516
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Retrokg88

USA
2 Posts

Posted - 03/18/2018 :  04:48:00  Show Profile
First time user here. All info on the eprom is "8017, MB8516 and J19". I was not able to locate MB8516 from the device list on the GQ-4x4 so I chose MB85R256 will this work? Each chip is coming back as blank but they have no cover over the window and the write process fails. Below is the pasted message.

Elapsed time: 0.00 seconds.
Write failed, Address=0x00003A, Buffer=0x00 Device=0xFF

Thank you in advance for any help.
Reply #1

anniel

2572 Posts

Posted - 03/18/2018 :  08:57:37  Show Profile
quote:
Originally posted by Retrokg88

First time user here. All info on the eprom is "8017, MB8516 and J19". I was not able to locate MB8516 from the device list on the GQ-4x4 so I chose MB85R256 will this work? Each chip is coming back as blank but they have no cover over the window and the write process fails. Below is the pasted message.

Elapsed time: 0.00 seconds.
Write failed, Address=0x00003A, Buffer=0x00 Device=0xFF

Thank you in advance for any help.



Try 2716 with external power.
Go to Top of Page
Reply #2

Retrokg88

USA
2 Posts

Posted - 03/18/2018 :  10:03:26  Show Profile
Thanks, I had noticed I was wrong thinking that they both started with mb85.. they would be the same series since the other had an extra set of pins. I tried MBM2716 but failed part way through without external power. Trying it now with external power. I will update, thanks again anniel.

That was it, needed the external power too! Thanks Anniel

Edited by - Retrokg88 on 03/18/2018 12:24:19
Go to Top of Page
Reply #3

anniel

2572 Posts

Posted - 03/18/2018 :  12:57:23  Show Profile
quote:
Originally posted by Retrokg88

Thanks, I had noticed I was wrong thinking that they both started with mb85.. they would be the same series since the other had an extra set of pins. I tried MBM2716 but failed part way through without external power. Trying it now with external power. I will update, thanks again anniel.

That was it, needed the external power too! Thanks Anniel



You're welcome!
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000