MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 top2048 000001:Error at (file=e3,device=ff)		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

cpsteve

11 Posts
Posted - 06/15/2007 :  21:59:03  Show Profile
hi!

i'm trying to program some type of eproms, mainly 27c160

it's all ok, program works and say OK when finish to burn, but when it start the VERIFY give me this error message:

000001:Error at (file=e3,device=ff)

i replace the eproms on my top2048 programmer and test it and it's blank, not programmed.

someone can help me?

thanks in advance.

Steve
Reply #1

ZLM

2945 Posts
Posted - 06/24/2007 :  00:08:18  Show Profile
Check the Vpp pin if it is correct during the programming. If the Vpp correct (about 12V), then the programmer need to repair.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000