MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Write error when programming AT28C256		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

penroseking

1 Posts
Posted - 06/26/2023 :  02:53:09  Show Profile  Reply with Quote
When attempting a write on my EEPROM I received the following error:

Full message log:

Ready
GQ-4x4 1.0 @ SW Re. 7.32
USB Driver Re.3.0
Software Re. 7.32
Checking new software on server...
Serial #: R22118332A
DEVICE AT28C256
Load G:\My Drive\Documents\BenEater\HelloWorld\xab
g:\my drive\documents\beneater\helloworld\xab.
Configuration OK!
This software is updated already.
<<AT28C256>>
ID check skipped
Writing... Buffer
Elapsed time: 0.20 seconds.
Write failed, Address=0x00003F, Buffer=0x00 Device=0xFF
Write failed

Chip markings:
ATMEL
AT28C256
15PU
2122
Reply #1

ZLM

2945 Posts
Posted - 07/13/2023 :  13:07:23  Show Profile  Reply with Quote
try to use slower speed. Like 0,-1,-2.

IF it still does not work, from software menu to diagnose the voltage.

If voltage is OK, then the problem may be the chip itself.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000