| Author |
 Topic  |
|
|
sergeis
Russia
7 Posts |
 Posted - 06/21/2017 : 07:00:33
|
Dear guys,
I am planning to buy GQ-5X universal programmer in order to program NAND chips for Samsung TVs. The only doubt I have that I have heard from my friend that the device works stably with Windows 10 only. Is that true? Please comment on that. Thanks. |
|
| Reply #1
supervizeur
462 Posts |
Posted - 06/21/2017 : 09:59:22
|
quote:
Originally posted by sergeis
Dear guys,
I am planning to buy GQ-5X universal programmer in order to program NAND chips for Samsung TVs. The only doubt I have that I have heard from my friend that the device works stably with Windows 10 only. Is that true? Please comment on that. Thanks.
False. |
 |
|
| Reply #2
sergeis
Russia
7 Posts |
Posted - 06/21/2017 : 10:36:17
|
| Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks. |
|
|
| Reply #3
supervizeur
462 Posts |
Posted - 06/21/2017 : 15:58:31
|
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes the GQ-5X handles those chips but the Xeltek SuperPro 6100 also does if you have the right adapter.
Those Samsung TVs also require extra steps in your workflow to succeed.
There are other topics in this forum discussing those steps in great details but some are in Spanish, if you have the time everything is documented. |
Edited by - supervizeur on 06/22/2017 04:34:34 |
|
|
| Reply #4
sergeis
Russia
7 Posts |
Posted - 06/21/2017 : 21:58:55
|
| I am sorry I did not get it. You mean GQ-4X or GQ-5X? Which one does the job? Or both? |
|
|
| Reply #5
supervizeur
462 Posts |
Posted - 06/22/2017 : 04:34:00
|
quote:
Originally posted by sergeis
I am sorry I did not get it. You mean GQ-4X or GQ-5X? Which one does the job? Or both?
Yes GQ-5X sorry. |
|
|
| Reply #6
anniel
2572 Posts |
Posted - 06/27/2017 : 10:50:28
|
quote:
Originally posted by sergeis
Dear guys,
I am planning to buy GQ-5X universal programmer in order to program NAND chips for Samsung TVs. The only doubt I have that I have heard from my friend that the device works stably with Windows 10 only. Is that true? Please comment on that. Thanks.
Works on pretty much any version of Windows you can throw at it. |
|
|
| Reply #7
anniel
2572 Posts |
Posted - 06/27/2017 : 10:51:10
|
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
Dear guys,
I am planning to buy GQ-5X universal programmer in order to program NAND chips for Samsung TVs. The only doubt I have that I have heard from my friend that the device works stably with Windows 10 only. Is that true? Please comment on that. Thanks.
False.
True that it's false. |
|
|
| Reply #8
anniel
2572 Posts |
Posted - 06/27/2017 : 10:53:43
|
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop. |
|
|
| Reply #9
anniel
2572 Posts |
Posted - 06/27/2017 : 10:57:43
|
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes the GQ-5X handles those chips but the Xeltek SuperPro 6100 also does if you have the right adapter.
Those Samsung TVs also require extra steps in your workflow to succeed.
There are other topics in this forum discussing those steps in great details but some are in Spanish, if you have the time everything is documented.
True but a Xeltek adapter alone will set you back more than the price of a GQ-5X with it's adapter. |
|
|
| Reply #10
anniel
2572 Posts |
Posted - 06/27/2017 : 11:00:46
|
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
I am sorry I did not get it. You mean GQ-4X or GQ-5X? Which one does the job? Or both?
Yes GQ-5X sorry.
Did you just have a lapsus calami there? |
|
|
| Reply #11
GQ5XSupport
104 Posts |
Posted - 07/05/2017 : 08:52:27
|
| I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it. |
|
|
| Reply #12
supervizeur
462 Posts |
Posted - 07/09/2017 : 08:30:49
|
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Dear guys,
I am planning to buy GQ-5X universal programmer in order to program NAND chips for Samsung TVs. The only doubt I have that I have heard from my friend that the device works stably with Windows 10 only. Is that true? Please comment on that. Thanks.
Works on pretty much any version of Windows you can throw at it.
+1 |
|
|
| Reply #13
supervizeur
462 Posts |
Posted - 07/09/2017 : 08:32:58
|
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
+1
US models also. Crappy firmware programming. |
|
|
| Reply #14
supervizeur
462 Posts |
Posted - 07/09/2017 : 08:33:56
|
quote:
Originally posted by anniel
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes the GQ-5X handles those chips but the Xeltek SuperPro 6100 also does if you have the right adapter.
Those Samsung TVs also require extra steps in your workflow to succeed.
There are other topics in this forum discussing those steps in great details but some are in Spanish, if you have the time everything is documented.
True but a Xeltek adapter alone will set you back more than the price of a GQ-5X with it's adapter.
+1 |
|
|
| Reply #15
supervizeur
462 Posts |
Posted - 07/09/2017 : 08:35:14
|
quote:
Originally posted by anniel
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
I am sorry I did not get it. You mean GQ-4X or GQ-5X? Which one does the job? Or both?
Yes GQ-5X sorry.
Did you just have a lapsus calami there?
Ok, ok, I'm not perfect! |
|
|
| Reply #16
supervizeur
462 Posts |
Posted - 07/09/2017 : 08:40:06
|
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
I don't think it would bring any value to the GQ-5X.
What has become of the "universal" part of the GQ-5X? Will it replace the GQ-4X eventually? |
|
|
| Reply #17
anniel
2572 Posts |
Posted - 07/13/2017 : 07:06:13
|
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Not here. |
|
|
| Reply #18
anniel
2572 Posts |
Posted - 07/13/2017 : 07:09:06
|
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
+1
US models also. Crappy firmware programming.
Crappy firmware you can say that again.
|
|
|
| Reply #19
anniel
2572 Posts |
Posted - 07/13/2017 : 07:09:48
|
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
quote:
Originally posted by supervizeur
quote:
Originally posted by sergeis
I am sorry I did not get it. You mean GQ-4X or GQ-5X? Which one does the job? Or both?
Yes GQ-5X sorry.
Did you just have a lapsus calami there?
Ok, ok, I'm not perfect!
 |
|
|
| Reply #20
anniel
2572 Posts |
Posted - 07/13/2017 : 07:11:01
|
quote:
Originally posted by supervizeur
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
I don't think it would bring any value to the GQ-5X.
What has become of the "universal" part of the GQ-5X? Will it replace the GQ-4X eventually?
+1 I would also like to know. |
|
|
| Reply #21
thetan76
Russia
23 Posts |
Posted - 07/20/2017 : 21:54:46
|
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Yes, it would be great to have a Linux version particularly for Ubuntu. I am personally sick and tired of Windows. Please do not hesitate and create one. :) |
ss |
|
|
| Reply #22
thetan76
Russia
23 Posts |
Posted - 07/20/2017 : 22:11:59
|
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
Dear guys please HELP!
I received my GQ-5X finally. However I cannot fix the TVs I have in my repair shop. I tried different dumps - no results. The TVs go in loop. All the dumps I have came from different sources.
Does anybody have a dump for NB41-01661 that was copied with GQ-5X?
I need it badly. I am struggling for months. Please help. Thanks. |
ss |
|
|
| Reply #23
GQ5XSupport
104 Posts |
Posted - 07/21/2017 : 04:17:27
|
| What chip is it? How did you get the source file? |
|
|
| Reply #24
thetan76
Russia
23 Posts |
Posted - 07/21/2017 : 06:47:06
|
And another question. My dump files are bigger than the size that is written in the Nand.txt file. My files end with 88A7D7FF address and in the Nand.txt it is written 86D00000. Which one is correct? Maybe I should change Nand.txt?
|
ss |
|
|
| Reply #25
thetan76
Russia
23 Posts |
Posted - 07/21/2017 : 06:48:28
|
quote:
Originally posted by GQ5XSupport
What chip is it? How did you get the source file?
The chip is K9GAG08U0E. The were copied with different programmers. |
ss |
|
|
| Reply #26
GQ5XSupport
104 Posts |
Posted - 07/21/2017 : 07:54:43
|
Yes there was an error in the nand.txt change it to
Name="K9GAG08U0E",MFG="Samsung",ID1="ech",ID2="d5h",ID3="84h",ID4="72h",ID5="50h",ID6="42h",size="88A7D800h",PageSize="21b4h",BlockSize="80h"
I am going to release 1.09 soon and it will contain over 400 NAND definitions.
Download Attachment: 
47293
The file uploaded here is in progress. Newer software will handle this file better. You might see more duplication with this file since the IDs are too short.
However if you specify the chip it will work. |
|
|
| Reply #27
thetan76
Russia
23 Posts |
Posted - 07/21/2017 : 22:59:51
|
| Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help. |
ss |
Edited by - thetan76 on 07/21/2017 23:02:38 |
|
|
| Reply #28
GQ5XSupport
104 Posts |
Posted - 07/22/2017 : 08:20:22
|
| Why not use 1.07. It uses different algorithm . |
|
|
| Reply #29
thetan76
Russia
23 Posts |
Posted - 07/22/2017 : 09:11:38
|
quote:
Originally posted by GQ5XSupport
Why not use 1.07. It uses different algorithm .
I did not get it. I AM using 1.07. Is it faulty? Then which one should I use to finally get it done? |
ss |
|
|
| Reply #30
GQ5XSupport
104 Posts |
|
| Reply #31
GQ5XSupport
104 Posts |
Posted - 07/22/2017 : 14:48:02
|
If you just do pure copy then there is no difference between 1.07 and 1.08. If you want to "Fix" the bad block which is normally the case then try 1.08.
Basically when it is not "working" is because your target chip and source chip has different bad sector map. 1.08 has slightly different algorithm than 1.07. However there is no guarantee it will work.
This is like older days when we use floppy disk (or hard disk) when they have the bad sectors, if you do "disk copy" the target disk files may not be accessible. However if you do file copy your files are perfect but the disk images are not exactly the same.
When bad block is in the firmware area, the "smart" copy normally will work OK. When the bad block is in data are, the smart copy might not work since unless the "file copy" method is used.
There is no universal "file" copy yet to be known. |
|
|
| Reply #32
MANN France
France
51 Posts |
Posted - 07/25/2017 : 10:40:26
|
quote:
Originally posted by thetan76
Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer) |
|
|
| Reply #33
thetan76
Russia
23 Posts |
Posted - 07/25/2017 : 20:52:14
|
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer)
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again? |
ss |
|
|
| Reply #34
MANN France
France
51 Posts |
Posted - 07/26/2017 : 00:31:56
|
quote:
Originally posted by thetan76
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Yes, . Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer)
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
OUI , le service commercial de MCU mall est irresponsable = il ne veut pas admettre que son produit ne fonctionne pas et me lle rembourser !!
mais je suis en rapport avec un vendeur de NANDS pragrammées des ILES CANARIES ( ESPAGNE) , qui utilise avec succès le //fr.aliexpress.com/item/TNM5000-USB-Universal-Programmer-with-ADP548T2-adapter/2045457701.html?spm=2114.13010308.0.0.JWxhUG
como usar o gravador TNM5000:
//www.youtube.com/watch?v=zdojQ0sLmdc&feature=youtu.be
TNM5000 Périphériques pris en charge Liste:
/www.tnmelectronics.com/downloads/List5000.TXT
voir http://www.mcumall.com/forum/topic.asp?TOPIC_ID=7819
Reply #95
Au moins celui là sait gérer les BAD BLOCK .
attention = sur les TV séries UExxD5500 ou UUxxD5700 (SMART TV) il y a une BN41_01660 ( avec K9GAG08U0E) = 16 Gbits . ce n'est pas le cas des BN41_01661 ( sans aucune NAND ) ou les BN41_01747 ( avec NAND 2 Gbits ) utlilsées sur les UExxD5000 ( pas smart TV) , qui sont nettement plus fiables.voir =
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
je peut contacter "TINO D"( iles CANARIES) et vous mettre en relation par message privé . Il vends des Nands programmées pour les UExxD5500 ou UUxxD5700 (SMART TV); mais n'est pas encore informé ( ni d'ailleurs le programeur de MCU mall)de mes essais ( partiellement réussis = 30% ) sur les UExxD5000 ( pas smart TV).
|
|
|
| Reply #35
thetan76
Russia
23 Posts |
Posted - 07/26/2017 : 10:48:21
|
Well, I need the dump for BN41-01661 as well as a programmer which can do the job. I have my own repair shop so I need to do it myself. Regarding TNM5000 - I have a contrary datum that it is unable to program K9GAG08U0E which was mentioned by the manufacturer.
|
ss |
Edited by - thetan76 on 07/26/2017 11:04:01 |
|
|
| Reply #36
MANN France
France
51 Posts |
Posted - 07/26/2017 : 14:15:44
|
quote:
Originally posted by GQ5XSupport
If you just do pure copy then there is no difference between 1.07 and 1.08. If you want to "Fix" the bad block which is normally the case then try 1.08.
Basically when it is not "working" is because your target chip and source chip has different bad sector map. 1.08 has slightly different algorithm than 1.07. However there is no guarantee it will work.
This is like older days when we use floppy disk (or hard disk) when they have the bad sectors, if you do "disk copy" the target disk files may not be accessible. However if you do file copy your files are perfect but the disk images are not exactly the same.
When bad block is in the firmware area, the "smart" copy normally will work OK. When the bad block is in data are, the smart copy might not work since unless the "file copy" method is used.
There is no universal "file" copy yet to be known.
OK = mes essais prouvent qu'actuellement , la réussite du clonage ne peut se faire que si la NAND cible n'a pas de BAD BLOCKS !
Aucune K9GAGo8UoE _SCBO n'a pas de Bad block ( Samsung les trie à la fabrication) .
La table des Bad blocks d'origine dans le BLOCK N°0 ( voir data sheet)
1)° le logiciel ne doit pas l'effacer , et respecter la procédure de gestion= Ce n'est probablement pas le cas!!
2)° il faut faire un mapping des données utiles de la NAND SOURCE , et vérifier qu'aucun BAD BLOCK de la cible ne corresponde .= refuser de copier si il y a des coïncidences entre la cible et la source ( sans "tripoter" les adresses physiques )
la version 1.08 présente une double fenêtre des bad block , mais si c'est un progrès , cela est insuffisant !!
j'attends les résultats !
il y a longtemps , sous DOS 3.3 à DOS 6.2 ( Windows n'existait pas ) , les logiciels de PCTOOLS et NORTON savaient faire le mapping des floppy ( 360 Kocts & 1,2 Moctet ) ; disquettes 1;44 Mocts & disques durs ( 50 Mocts !! ) , avec les données utiles , secteurs alloués ; non alloués , défectueux ; etc ....
Je ne suis pas développeur , mais j'ai de la mémoire de ce qui fonctionnait bien il y a une trentaine d'années .En 2017, on devrait quand même être meilleurs q'en 1985 !!! ( j'en doute )
être incapable de copier une NAND ( en 2017) est aussi inacceptable que de ne pas faire une copie fiable sur un disque souple de 1,2 Mocts !....(en 1985)
Les manipulations dites "smart copy" ,des données par ré-allocations de secteurs , ne font que de tenter de tromper le système du processeur et du firmware de la carte mère = c'est une source de dis-fonctionnement incontrôlable , en situation de fonctionnement réel sur la TV .
Et pire , le support produit MCu Mall vient de modifier les données dans le fichier NAND.TXT =c'est un comble !!
Donc c'est un aveu que les logiciels ne fonctionnaient pas !!et sont toujours inexploitables sur les cartes mères SAMSUNG. |
|
|
| Reply #37
GQ5XSupport
104 Posts |
Posted - 07/26/2017 : 15:07:43
|
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
For your reference, I own a TNM5000-NAND programmer and I do not see it has any better functions than GQ5x other than specify the start and end blocks.
1.09 will release soon and add this feature in. |
|
|
| Reply #38
thetan76
Russia
23 Posts |
Posted - 07/26/2017 : 20:52:46
|
Could you specify the date of 1.09 release, please.
|
ss |
|
|
| Reply #39
thetan76
Russia
23 Posts |
Posted - 07/26/2017 : 20:56:10
|
Dear GQ5XSupport,
It would be great if you could test the 1.09 on Samsung BN41-01661 (Samsusng 5500 Series). I am fighting with K9GAG08U0E for months. Please make it happen, Sir.
|
ss |
|
|
| Reply #40
MANN France
France
51 Posts |
Posted - 07/27/2017 : 05:34:44
|
quote:
Originally posted by thetan76
Dear GQ5XSupport,
It would be great if you could test the 1.09 on Samsung BN41-01661 (Samsusng 5500 Series). I am fighting with K9GAG08U0E for months. Please make it happen, Sir.
moi aussi > = I am fighting with K9GAG08U0E for months. Please make it happen, Sir. THANK YOU !!
N.B => for K9GAG08U0E = read BN41-01660 (Samsusng 5500 Series) = SMART TV (de merde) 2Goct : 100% bad blocks ; not BN41-01661 (Samsusng 5500 Series); but BN41-01661 (Samsusng 5000 Series)= OK ---> not NAND on printed board or BN41_01747 = better , not SMART TV ; not Smart HUb , Significantly more reliable ; K9F1G08U0D-SCBO =128 Mocts = only 70% Bad blocks ; 30% Without bad block ( on order 10 components) = clone = full OK
see = http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing)
doit on mettre le QG-5X à la poubelle ; et acheter en POLOGNE des nands programmées ???
http://www.ebay.fr/itm/SAMSUNG-UE32-UE37-UE40-UE46-D5500-D5700-NAND-K9GAG08U0E-PROGRAMMED-TESTED-/231974177423?hash=item3602bd0a8f:g:hm4AAOSwMNxXWWMC
SAMSUNG UE32 UE37 UE40 UE46 D5500 / D5700 NAND K9GAG08U0E PROGRAMMED & TESTED
BN41-01660B BN94-04456A BN94-05307A BN41-01577A
116,00 PLN
Environ 27,57 EUR
Livraison : GRATUIT Przesy#322;ka zagraniczna - priorytetowa | Détails
Lieu où se trouve l'objet :
Sucha Beskidzka, Pologne
Lieu de livraison :
Europe
Conclusion = the software does not handle bad blocks = must put the QG-5X in the trash; And buy in POLAND programmed nands ???
 |
|
|
| Reply #41
sergeis
Russia
7 Posts |
|
| Reply #42
anniel
2572 Posts |
Posted - 07/27/2017 : 15:05:03
|
quote:
Originally posted by thetan76
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
Dear guys please HELP!
I received my GQ-5X finally. However I cannot fix the TVs I have in my repair shop. I tried different dumps - no results. The TVs go in loop. All the dumps I have came from different sources.
Does anybody have a dump for NB41-01661 that was copied with GQ-5X?
I need it badly. I am struggling for months. Please help. Thanks.
What are those sources? Are you sure those dumps where made correctly? |
|
|
| Reply #43
anniel
2572 Posts |
Posted - 07/27/2017 : 15:06:56
|
quote:
Originally posted by thetan76
And another question. My dump files are bigger than the size that is written in the Nand.txt file. My files end with 88A7D7FF address and in the Nand.txt it is written 86D00000. Which one is correct? Maybe I should change Nand.txt?
Makes no difference the end of the files contain no data. |
|
|
| Reply #44
anniel
2572 Posts |
Posted - 07/27/2017 : 15:08:43
|
quote:
Originally posted by thetan76
quote:
Originally posted by GQ5XSupport
What chip is it? How did you get the source file?
The chip is K9GAG08U0E. The were copied with different programmers.
What are your firmware revisions? |
|
|
| Reply #45
anniel
2572 Posts |
Posted - 07/27/2017 : 15:15:35
|
quote:
Originally posted by thetan76
[quote]
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
No, if you follow the correct procedure posted in another thread, it works flawlessly. |
|
|
| Reply #46
anniel
2572 Posts |
Posted - 07/27/2017 : 15:20:15
|
quote:
Originally posted by GQ5XSupport
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
For your reference, I own a TNM5000-NAND programmer and I do not see it has any better functions than GQ5x other than specify the start and end blocks.
1.09 will release soon and add this feature in.
He can't use proper English he is not even able to use proper French. |
|
|
| Reply #47
anniel
2572 Posts |
|
| Reply #48
thetan76
Russia
23 Posts |
Posted - 07/28/2017 : 20:47:55
|
| Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please. |
ss |
Edited by - thetan76 on 07/28/2017 20:48:40 |
|
|
| Reply #49
MANN France
France
51 Posts |
Posted - 07/29/2017 : 02:22:02
|
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
verry NOT Great != good copy of BN41-01661 ??? Does not have a NAND at all, only a BGA box for the firmware (UE xxD5000, not SMART TV)
good copy of BN41-01660 ( séries SMART TV UExxD5500 or UExxD5700 ) ??
I have been sending components in Canada for months, I have been waiting for a copy of NANS since !! = Must not dream; The GQ-5X does not work with bad blocks, or it's by chance (not matching the mappings of the [source] user data with the bad blocks, without "fiddling" addresses = a miracle !!) be brave !!
cela fait des mois que j'ai envoyé des composnts au CANADA , j'attends une copie de NANS depuis !! = faut pas rêver ; le GQ-5X ne fonctionne pas avec des bad blocks , ou c'est par hazard ( non correspondance sur les mappings des données utiles [source] avec les bad blocks [ cible ] ; sans "tripotage" des adresses = un miracle !! )bon courrage !! |
|
|
| Reply #50
GQ5XSupport
104 Posts |
Posted - 07/29/2017 : 07:39:53
|
As of the bad blocks,
1. I have purchased TNM5000. I do not see it has the capability to handle bad block better than GQ5X. I will add support to bypass the blocks. See picture.
2. We provide NAND programmer to program the NAND flash. We are not making NAND flash working on TV system which the OS not known (most likely linux). We provide tools like diskcopy not file copy. Third party software might need to generate proper file for the TV for particular chip. We have done some simple tricks to BYPASS the bad blocks. TV most likely are using Linux as its OS. In linux there are several file systems like SquashFS,jffs2 etc. Even for SquashFS there are versions of it. Each one might handle bad blocks different. In old days, on a DOS system, there is a FAT table to mark the data and bad blocks. IF that is the case, for each bad block the FAT table needs to be modified as well as the data needs to be moved to different location. These are done by the OS not the software that do the copy. An older days diskcopy will not do the work a file copy does.
If the algorithm of the bad blocks for TV system is known or documented somewhere, we are more than happy to put in our software.
3. My understanding is that if the bad blocks is in the firmware area, the skip bad blocks works fine which is already in 1.08. If the bad blocks is in the data area, the current algorithm is not sufficient and I do not know any programmer can do it.
[b]Image Insert:[/b][br] [br][size=1] 14497 bytes[/size=1]
[b]Download Attachment:[/b] [br]4760920 |
|
|
| Reply #51
anniel
2572 Posts |
Posted - 08/02/2017 : 05:04:23
|
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
verry NOT Great != good copy of BN41-01661 ??? Does not have a NAND at all, only a BGA box for the firmware (UE xxD5000, not SMART TV)
good copy of BN41-01660 ( séries SMART TV UExxD5500 or UExxD5700 ) ??
C'est incroyable être aussi incompétent! Bien sur que le BN41-01661 a un NAND c'est un KFG1GN6W2D.
quote:
Originally posted by MANN France
I have been sending components in Canada for months, I have been waiting for a copy of NANS since !! = Must not dream; The GQ-5X does not work with bad blocks, or it's by chance (not matching the mappings of the [source] user data with the bad blocks, without "fiddling" addresses = a miracle !!) be brave !!
cela fait des mois que j'ai envoyé des composnts au CANADA , j'attends une copie de NANS depuis !! = faut pas rêver ; le GQ-5X ne fonctionne pas avec des bad blocks , ou c'est par hazard ( non correspondance sur les mappings des données utiles [source] avec les bad blocks [ cible ] ; sans "tripotage" des adresses = un miracle !! )bon courrage !!
Qui est ce "NANS" à qui vous avez envoyer ces "composnts"? |
|
|
| Reply #52
eduardo48
Argentina
152 Posts |
|
| Reply #53
MANN France
France
51 Posts |
Posted - 08/02/2017 : 23:17:48
|
C'est incroyable être aussi incompétent! Bien sur que le BN41-01661 a un NAND c'est un KFG1GN6W2D.
cartes mères compatibles ,; pas de PB avec la mémoire ( BN41_01661 = n'en a pas ; BN41_01747 : contient le FIRMWARE ; seulement 128 Mocts au lieu de 2 Gocts ; 30 % de mémoires neuves à l'achat sans BAD BLOCK ! 15 euros les 10 : aliexpress )
Stupid!> = Download the service manual =
Compatible motherboards; No PB with memory (BN41_01661 = does not have one BN41_01747: contains FIRMWARE, only 128 Mocts instead of 2 Gocts, 30% new memories to buy without BAD BLOCK! 15 euros the 10: aliexpress)
éléchargez le service manual , et vous verrez les différences !!=
https://elektrotanya.com/?q=keres puis Search:
UE40D5500
OK
https://elektrotanya.com/?q=showresult sélectionner = Hits: 3 Requested strings: UE 40 D 5500
Le Doksi neve Tip. Kat. Alkat. Méret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
et vous avez tout ( diverses versoins , diverses cartes mères , etc ))
Download manual service, and you will see the differences !! =
Https://elektrotanya.com/?q=keres then Search:
UE40D5500
OK
Https://elektrotanya.com/?q=showresult select = Hits: 3 Requested strings: UE 40 D 5500
The Doksi neve Tip. Kat. Alkat. Meret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
And you have everything (various payments, various motherboards, etc))
p 4-139 = U57A – UD40XX (32") = NB41_01661 = NO anny NAND = Super
p 4-143 = U57A – UD50XX (32"/37"/40"/46") / UD40XX (32") = BN41_01747 = NAND : K9F1G08U0D = OK with FIRMWARE =
see = http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing)
++++++++++++
Qui est ce "NANS" à qui vous avez envoyer ces "composnts"?
[/quote]
alors arrêtez de dire des conneries , mon cher !!j'ai expédié au CANADA ( votre ingénieur logiciel ! ) , des échantillons et un DVD ROM , il y a déja bien des mois ( adresse donnée par le support produit = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. Je pars en vacances , et vous feriez bien d'en prendre aussi .
So stop telling bull****, my dear !! I shipped to CANADA (your software engineer!), Samples and a DVD ROM, many months ago (address given by product support = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. I'm going on vacation, and you'd better take some too!
-----------------
C'est incroyable être aussi incompétent! = yes! == for only you !! |
|
|
| Reply #54
supervizeur
462 Posts |
Posted - 08/03/2017 : 06:42:04
|
quote:
Originally posted by anniel
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Not here.
+1 and dont forget the Linux crowd likes to modify and tweak software so they'll end up with a hand full of incompatible GQ-4X software distros. |
|
|
| Reply #55
supervizeur
462 Posts |
Posted - 08/03/2017 : 06:42:59
|
quote:
Originally posted by anniel
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
+1
US models also. Crappy firmware programming.
Crappy firmware you can say that again.
Crappy firmware. |
|
|
| Reply #56
supervizeur
462 Posts |
Posted - 08/03/2017 : 06:49:15
|
quote:
Originally posted by thetan76
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Yes, it would be great to have a Linux version particularly for Ubuntu. I am personally sick and tired of Windows. Please do not hesitate and create one. :)
-1 What's wrong with Windows? |
|
|
| Reply #57
supervizeur
462 Posts |
Posted - 08/03/2017 : 06:54:54
|
quote:
Originally posted by thetan76
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
Dear guys please HELP!
I received my GQ-5X finally. However I cannot fix the TVs I have in my repair shop. I tried different dumps - no results. The TVs go in loop. All the dumps I have came from different sources.
Does anybody have a dump for NB41-01661 that was copied with GQ-5X?
I need it badly. I am struggling for months. Please help. Thanks.
Make the dumps yourself from working BN41-01660 and NB41-01661 boards after following the protocol. |
|
|
| Reply #58
supervizeur
462 Posts |
Posted - 08/03/2017 : 06:58:47
|
quote:
Originally posted by GQ5XSupport
What chip is it? How did you get the source file?
KFG1GN6W2D |
|
|
| Reply #59
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:03:59
|
quote:
Originally posted by thetan76
And another question. My dump files are bigger than the size that is written in the Nand.txt file. My files end with 88A7D7FF address and in the Nand.txt it is written 86D00000. Which one is correct? Maybe I should change Nand.txt?
This bug is fixed in the current version but does not affect the Samsung firmware since the end of the file is blank. |
|
|
| Reply #60
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:08:39
|
quote:
Originally posted by thetan76
Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
If it goes in a boot loop you didn't follow the instructions correctly before making the dump. |
|
|
| Reply #61
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:11:13
|
quote:
Originally posted by thetan76
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer)
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
No. |
|
|
| Reply #62
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:19:45
|
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Yes, . Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer)
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
OUI , le service commercial de MCU mall est irresponsable = il ne veut pas admettre que son produit ne fonctionne pas et me lle rembourser !!
mais je suis en rapport avec un vendeur de NANDS pragrammées des ILES CANARIES ( ESPAGNE) , qui utilise avec succès le //fr.aliexpress.com/item/TNM5000-USB-Universal-Programmer-with-ADP548T2-adapter/2045457701.html?spm=2114.13010308.0.0.JWxhUG
como usar o gravador TNM5000:
//www.youtube.com/watch?v=zdojQ0sLmdc&feature=youtu.be
TNM5000 Périphériques pris en charge Liste:
/www.tnmelectronics.com/downloads/List5000.TXT
voir http://www.mcumall.com/forum/topic.asp?TOPIC_ID=7819
Reply #95
Au moins celui là sait gérer les BAD BLOCK .
attention = sur les TV séries UExxD5500 ou UUxxD5700 (SMART TV) il y a une BN41_01660 ( avec K9GAG08U0E) = 16 Gbits . ce n'est pas le cas des BN41_01661 ( sans aucune NAND ) ou les BN41_01747 ( avec NAND 2 Gbits ) utlilsées sur les UExxD5000 ( pas smart TV) , qui sont nettement plus fiables.voir =
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
je peut contacter "TINO D"( iles CANARIES) et vous mettre en relation par message privé . Il vends des Nands programmées pour les UExxD5500 ou UUxxD5700 (SMART TV); mais n'est pas encore informé ( ni d'ailleurs le programeur de MCU mall)de mes essais ( partiellement réussis = 30% ) sur les UExxD5000 ( pas smart TV).
PLEASE STOP TELLING LIES! And read, if you know how to read.
BN41_01661 has a NAND containing the firmware like all Samsung TVs, it is IC1301, a KFG1GN6W2D. |
|
|
| Reply #63
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:31:30
|
quote:
Originally posted by MANN France
Je ne suis pas développeur , mais j'ai de la mémoire de ce qui fonctionnait bien il y a une trentaine d'années .En 2017, on devrait quand même être meilleurs q'en 1985 !!! ( j'en doute )
être incapable de copier une NAND ( en 2017) est aussi inacceptable que de ne pas faire une copie fiable sur un disque souple de 1,2 Mocts !....(en 1985)
So you confess the problem effectively comes from your long standing inability to make a copy.
quote:
Originally posted by MANN France
Et pire , le support produit MCu Mall vient de modifier les données dans le fichier NAND.TXT =c'est un comble !!
Donc c'est un aveu que les logiciels ne fonctionnaient pas !!et sont toujours inexploitables sur les cartes mères SAMSUNG.
You are now telling that the MCU Mall service is top notch. Like all the big players (think Microsoft) MCU Mall releases software revisions to iron out bugs and introduce new functionalities. |
|
|
| Reply #64
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:33:10
|
quote:
Originally posted by GQ5XSupport
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
He can't understand what he says... |
|
|
| Reply #65
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:41:59
|
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Dear GQ5XSupport,
It would be great if you could test the 1.09 on Samsung BN41-01661 (Samsusng 5500 Series). I am fighting with K9GAG08U0E for months. Please make it happen, Sir.
moi aussi > = I am fighting with K9GAG08U0E for months. Please make it happen, Sir. THANK YOU !!
N.B => for K9GAG08U0E = read BN41-01660 (Samsusng 5500 Series) = SMART TV (de merde) 2Goct : 100% bad blocks ; not BN41-01661 (Samsusng 5500 Series); but BN41-01661 (Samsusng 5000 Series)= OK ---> not NAND on printed board or BN41_01747 = better , not SMART TV ; not Smart HUb , Significantly more reliable ; K9F1G08U0D-SCBO =128 Mocts = only 70% Bad blocks ; 30% Without bad block ( on order 10 components) = clone = full OK
see = http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing)
doit on mettre le QG-5X à la poubelle ; et acheter en POLOGNE des nands programmées ???
http://www.ebay.fr/itm/SAMSUNG-UE32-UE37-UE40-UE46-D5500-D5700-NAND-K9GAG08U0E-PROGRAMMED-TESTED-/231974177423?hash=item3602bd0a8f:g:hm4AAOSwMNxXWWMC
SAMSUNG UE32 UE37 UE40 UE46 D5500 / D5700 NAND K9GAG08U0E PROGRAMMED & TESTED
BN41-01660B BN94-04456A BN94-05307A BN41-01577A
116,00 PLN
Environ 27,57 EUR
Livraison : GRATUIT Przesy#322;ka zagraniczna - priorytetowa | Détails
Lieu où se trouve l'objet :
Sucha Beskidzka, Pologne
Lieu de livraison :
Europe
Conclusion = the software does not handle bad blocks = must put the QG-5X in the trash; And buy in POLAND programmed nands ???
So much wrong in your post.
Again BN41-01661 has NAND.
The software does handle bad blocks.
Maybe you should buy NAND chips programmed in Poland, it would save us the deception. |
|
|
| Reply #66
supervizeur
462 Posts |
|
| Reply #67
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:45:30
|
quote:
Originally posted by anniel
quote:
Originally posted by thetan76
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
Dear guys please HELP!
I received my GQ-5X finally. However I cannot fix the TVs I have in my repair shop. I tried different dumps - no results. The TVs go in loop. All the dumps I have came from different sources.
Does anybody have a dump for NB41-01661 that was copied with GQ-5X?
I need it badly. I am struggling for months. Please help. Thanks.
What are those sources? Are you sure those dumps where made correctly?
+1 |
|
|
| Reply #68
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:46:26
|
quote:
Originally posted by anniel
quote:
Originally posted by thetan76
And another question. My dump files are bigger than the size that is written in the Nand.txt file. My files end with 88A7D7FF address and in the Nand.txt it is written 86D00000. Which one is correct? Maybe I should change Nand.txt?
Makes no difference the end of the files contain no data.
+1 True. |
|
|
| Reply #69
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:47:14
|
quote:
Originally posted by anniel
quote:
Originally posted by thetan76
[quote]
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
No, if you follow the correct procedure posted in another thread, it works flawlessly.
+1 True. |
|
|
| Reply #70
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:47:55
|
quote:
Originally posted by anniel
quote:
Originally posted by GQ5XSupport
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
For your reference, I own a TNM5000-NAND programmer and I do not see it has any better functions than GQ5x other than specify the start and end blocks.
1.09 will release soon and add this feature in.
He can't use proper English he is not even able to use proper French.
+1 True. |
|
|
| Reply #71
supervizeur
462 Posts |
|
| Reply #72
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:51:07
|
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
Of corse, what equipment do you have access to? |
|
|
| Reply #73
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:56:43
|
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
verry NOT Great != good copy of BN41-01661 ??? Does not have a NAND at all, only a BGA box for the firmware (UE xxD5000, not SMART TV)
good copy of BN41-01660 ( séries SMART TV UExxD5500 or UExxD5700 ) ??
I have been sending components in Canada for months, I have been waiting for a copy of NANS since !! = Must not dream; The GQ-5X does not work with bad blocks, or it's by chance (not matching the mappings of the [source] user data with the bad blocks, without "fiddling" addresses = a miracle !!) be brave !!
cela fait des mois que j'ai envoyé des composnts au CANADA , j'attends une copie de NANS depuis !! = faut pas rêver ; le GQ-5X ne fonctionne pas avec des bad blocks , ou c'est par hazard ( non correspondance sur les mappings des données utiles [source] avec les bad blocks [ cible ] ; sans "tripotage" des adresses = un miracle !! )bon courrage !!
Again, the NAND is IC1301.
A BGA box?
Why have you been sending components to Canada?
NANS?
Yes the GQ-5X works with bad blocks. |
|
|
| Reply #74
supervizeur
462 Posts |
Posted - 08/03/2017 : 07:59:37
|
quote:
Originally posted by anniel
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
verry NOT Great != good copy of BN41-01661 ??? Does not have a NAND at all, only a BGA box for the firmware (UE xxD5000, not SMART TV)
good copy of BN41-01660 ( séries SMART TV UExxD5500 or UExxD5700 ) ??
C'est incroyable être aussi incompétent! Bien sur que le BN41-01661 a un NAND c'est un KFG1GN6W2D.
quote:
Originally posted by MANN France
I have been sending components in Canada for months, I have been waiting for a copy of NANS since !! = Must not dream; The GQ-5X does not work with bad blocks, or it's by chance (not matching the mappings of the [source] user data with the bad blocks, without "fiddling" addresses = a miracle !!) be brave !!
cela fait des mois que j'ai envoyé des composnts au CANADA , j'attends une copie de NANS depuis !! = faut pas rêver ; le GQ-5X ne fonctionne pas avec des bad blocks , ou c'est par hazard ( non correspondance sur les mappings des données utiles [source] avec les bad blocks [ cible ] ; sans "tripotage" des adresses = un miracle !! )bon courrage !!
Qui est ce "NANS" à qui vous avez envoyer ces "composnts"?
+1 |
|
|
| Reply #75
supervizeur
462 Posts |
|
| Reply #76
supervizeur
462 Posts |
Posted - 08/03/2017 : 08:23:44
|
quote:
Originally posted by MANN France
C'est incroyable être aussi incompétent! Bien sur que le BN41-01661 a un NAND c'est un KFG1GN6W2D.
True.
quote:
Originally posted by MANN France
cartes mères compatibles ,; pas de PB avec la mémoire ( BN41_01661 = n'en a pas
False IC1101, IC1102, IC1301 etc...
quote:
Originally posted by MANN France
Stupid!> = Download the service manual =
Compatible motherboards; No PB with memory (BN41_01661 = does not have one
False all boards have memory chips.
quote:
Originally posted by MANN France
éléchargez le service manual , et vous verrez les différences !!=
https://elektrotanya.com/?q=keres puis Search:
UE40D5500
OK
https://elektrotanya.com/?q=showresult sélectionner = Hits: 3 Requested strings: UE 40 D 5500
Le Doksi neve Tip. Kat. Alkat. Méret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
et vous avez tout ( diverses versoins , diverses cartes mères , etc ))
Download manual service, and you will see the differences !! =
Https://elektrotanya.com/?q=keres then Search:
UE40D5500
OK
Https://elektrotanya.com/?q=showresult select = Hits: 3 Requested strings: UE 40 D 5500
The Doksi neve Tip. Kat. Alkat. Meret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
And you have everything (various payments, various motherboards, etc))
Everybody here knows how to download poor man's service manuals.
quote:
Originally posted by MANN France
p 4-139 = U57A – UD40XX (32") = NB41_01661 = NO anny NAND
False IC1301
quote:
Originally posted by MANN France
Qui est ce "NANS" à qui vous avez envoyer ces "composnts"?
Yes, I would like to know!
quote:
Originally posted by MANN France
alors arrêtez de dire des conneries , mon cher !!j'ai expédié au CANADA ( votre ingénieur logiciel ! ) , des échantillons et un DVD ROM , il y a déja bien des mois ( adresse donnée par le support produit = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. Je pars en vacances , et vous feriez bien d'en prendre aussi .
So stop telling bull****, my dear !! I shipped to CANADA (your software engineer!), Samples and a DVD ROM, many months ago (address given by product support = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. I'm going on vacation, and you'd better take some too!
To whom are you directing this comment?
quote:
Originally posted by MANN France
C'est incroyable être aussi incompétent! = yes! == for only you !!
I know you are incompetent but for who? |
Edited by - supervizeur on 08/03/2017 08:31:29 |
|
|
| Reply #77
anniel
2572 Posts |
Posted - 09/15/2017 : 02:57:54
|
quote:
Originally posted by supervizeur
quote:
Originally posted by anniel
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Not here.
+1 and dont forget the Linux crowd likes to modify and tweak software so they'll end up with a hand full of incompatible GQ-4X software distros.
Yes a hand full of GQ-4X software distros, like Linux. |
|
|
| Reply #78
anniel
2572 Posts |
Posted - 09/15/2017 : 03:04:17
|
quote:
Originally posted by supervizeur
quote:
Originally posted by thetan76
quote:
Originally posted by GQ5XSupport
I am planning adding Linux version for GQ-5X. Not sure if there is any interest for it.
Yes, it would be great to have a Linux version particularly for Ubuntu. I am personally sick and tired of Windows. Please do not hesitate and create one. :)
-1 What's wrong with Windows?
Windows hater. |
|
|
| Reply #79
anniel
2572 Posts |
Posted - 09/15/2017 : 03:06:19
|
quote:
Originally posted by supervizeur
quote:
Originally posted by thetan76
quote:
Originally posted by anniel
quote:
Originally posted by sergeis
Well thanks, Another question. I need this device for my repair shop where I have several Samsung UE32D5520 (BN41-01660) having cyclic reloading. I tried many other programmers including Xeltek 6100 - no result. According to my knowledge QG-5X can handle the K9GAG08. Does anyone have some experience with such TVs programmed by QS-5X successfully? Thanks.
Yes but not exactly the same models. Canadian versions are also plagued with the same dreaded boot loop.
Dear guys please HELP!
I received my GQ-5X finally. However I cannot fix the TVs I have in my repair shop. I tried different dumps - no results. The TVs go in loop. All the dumps I have came from different sources.
Does anybody have a dump for NB41-01661 that was copied with GQ-5X?
I need it badly. I am struggling for months. Please help. Thanks.
Make the dumps yourself from working BN41-01660 and NB41-01661 boards after following the protocol.
+1 It's the best way to have a good source file. |
|
|
| Reply #80
anniel
2572 Posts |
Posted - 09/15/2017 : 03:07:36
|
quote:
Originally posted by supervizeur
quote:
Originally posted by GQ5XSupport
What chip is it? How did you get the source file?
KFG1GN6W2D
+1 |
|
|
| Reply #81
anniel
2572 Posts |
Posted - 09/15/2017 : 03:08:22
|
quote:
Originally posted by supervizeur
quote:
Originally posted by thetan76
And another question. My dump files are bigger than the size that is written in the Nand.txt file. My files end with 88A7D7FF address and in the Nand.txt it is written 86D00000. Which one is correct? Maybe I should change Nand.txt?
This bug is fixed in the current version but does not affect the Samsung firmware since the end of the file is blank.
+1 |
|
|
| Reply #82
anniel
2572 Posts |
Posted - 09/15/2017 : 03:10:03
|
quote:
Originally posted by supervizeur
quote:
Originally posted by thetan76
Yes, I changed the nand.txt but no result again. I am using 1.07 version and Smart copy mode.The TV goes in loop with the dumps I have. By the way, one of my dumps works fine except smart menu if I program it on RT809H. If I use GQ-5X for programming the TV goes in loop. Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
If it goes in a boot loop you didn't follow the instructions correctly before making the dump.
+1 or your donor is bad.
|
|
|
| Reply #83
anniel
2572 Posts |
Posted - 09/15/2017 : 03:11:56
|
quote:
Originally posted by supervizeur
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Yes, . Does anyone have a working dump for Samsung 5500 series MB BN41-01661 nand K9GAG08U0E? I need it badly. I bought three programmers including GQ-5X but got no result. Please help.
Bonjour à l'est de l'EUROPE.Mais en FRANCE , cela ne fonctionne (toujours) pas mieux, si cela peut consoler la RUSSIE .Je viens de tester le logiciel ( version 1.08;avec nouvelle définition NAND.txt ) , sur des BN41-01747A !!! = les NANDs n'ont que 2 gbits de capacité et pas 16G bits. = miracle = 3 réusites sur 10 nands = oui, mais elle n'ont pas de bad block d'origine !! = j'ai même réussi à changer le FIRMWARE ( fantastique) c'est donc que les GQ-5X ne fonctionnent pas avec des BAD BLOCK = publicité mensongère sur E bay = remboursez moi S.V.P
voir détails http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing) ....
je n'ai pas encore eu le temps de détailler , mais je doit d'abord informer le programmeur de mes nouveaux résultats sur les NANDs séries K9F1G08U0D et K9F1G08U0E' new desing) =
ancienne version K9F1G08U0D = succès total sur 3 composants ( sans Bad block) ; échec sur les 7 autres ( avec bad blocks)
nouvelle version K9F1G08U0E' new desing = Qté = 5 = seraient toutes SANS bad block , MAIS Echec total !!! à ne rien comprendre , sauf que la copie ne fonctionne pas !!!
en attente de remarques déplacées et totalement imbéciles de deux individus ( faciles à repérer)
That means that GQ-5X is not suitable for programming K9GAG08E0U and that also means that I wasted my money again?
OUI , le service commercial de MCU mall est irresponsable = il ne veut pas admettre que son produit ne fonctionne pas et me lle rembourser !!
mais je suis en rapport avec un vendeur de NANDS pragrammées des ILES CANARIES ( ESPAGNE) , qui utilise avec succès le //fr.aliexpress.com/item/TNM5000-USB-Universal-Programmer-with-ADP548T2-adapter/2045457701.html?spm=2114.13010308.0.0.JWxhUG
como usar o gravador TNM5000:
//www.youtube.com/watch?v=zdojQ0sLmdc&feature=youtu.be
TNM5000 Périphériques pris en charge Liste:
/www.tnmelectronics.com/downloads/List5000.TXT
voir http://www.mcumall.com/forum/topic.asp?TOPIC_ID=7819
Reply #95
Au moins celui là sait gérer les BAD BLOCK .
attention = sur les TV séries UExxD5500 ou UUxxD5700 (SMART TV) il y a une BN41_01660 ( avec K9GAG08U0E) = 16 Gbits . ce n'est pas le cas des BN41_01661 ( sans aucune NAND ) ou les BN41_01747 ( avec NAND 2 Gbits ) utlilsées sur les UExxD5000 ( pas smart TV) , qui sont nettement plus fiables.voir =
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
je peut contacter "TINO D"( iles CANARIES) et vous mettre en relation par message privé . Il vends des Nands programmées pour les UExxD5500 ou UUxxD5700 (SMART TV); mais n'est pas encore informé ( ni d'ailleurs le programeur de MCU mall)de mes essais ( partiellement réussis = 30% ) sur les UExxD5000 ( pas smart TV).
PLEASE STOP TELLING LIES! And read, if you know how to read.
BN41_01661 has a NAND containing the firmware like all Samsung TVs, it is IC1301, a KFG1GN6W2D.
+1 |
|
|
| Reply #84
anniel
2572 Posts |
Posted - 09/15/2017 : 03:13:17
|
quote:
Originally posted by supervizeur
quote:
Originally posted by MANN France
Je ne suis pas développeur , mais j'ai de la mémoire de ce qui fonctionnait bien il y a une trentaine d'années .En 2017, on devrait quand même être meilleurs q'en 1985 !!! ( j'en doute )
être incapable de copier une NAND ( en 2017) est aussi inacceptable que de ne pas faire une copie fiable sur un disque souple de 1,2 Mocts !....(en 1985)
So you confess the problem effectively comes from your long standing inability to make a copy.
quote:
Originally posted by MANN France
Et pire , le support produit MCu Mall vient de modifier les données dans le fichier NAND.TXT =c'est un comble !!
Donc c'est un aveu que les logiciels ne fonctionnaient pas !!et sont toujours inexploitables sur les cartes mères SAMSUNG.
You are now telling that the MCU Mall service is top notch. Like all the big players (think Microsoft) MCU Mall releases software revisions to iron out bugs and introduce new functionalities.
+1 |
|
|
| Reply #85
anniel
2572 Posts |
Posted - 09/15/2017 : 03:17:21
|
quote:
Originally posted by supervizeur
quote:
Originally posted by GQ5XSupport
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
He can't understand what he says...
What he needs is this.
 |
|
|
| Reply #86
anniel
2572 Posts |
Posted - 09/15/2017 : 03:21:24
|
quote:
Originally posted by supervizeur
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Dear GQ5XSupport,
It would be great if you could test the 1.09 on Samsung BN41-01661 (Samsusng 5500 Series). I am fighting with K9GAG08U0E for months. Please make it happen, Sir.
moi aussi > = I am fighting with K9GAG08U0E for months. Please make it happen, Sir. THANK YOU !!
N.B => for K9GAG08U0E = read BN41-01660 (Samsusng 5500 Series) = SMART TV (de merde) 2Goct : 100% bad blocks ; not BN41-01661 (Samsusng 5500 Series); but BN41-01661 (Samsusng 5000 Series)= OK ---> not NAND on printed board or BN41_01747 = better , not SMART TV ; not Smart HUb , Significantly more reliable ; K9F1G08U0D-SCBO =128 Mocts = only 70% Bad blocks ; 30% Without bad block ( on order 10 components) = clone = full OK
see = http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8170
clonage K9F1G08U0D-SCBO et E ( new desing)
doit on mettre le QG-5X à la poubelle ; et acheter en POLOGNE des nands programmées ???
http://www.ebay.fr/itm/SAMSUNG-UE32-UE37-UE40-UE46-D5500-D5700-NAND-K9GAG08U0E-PROGRAMMED-TESTED-/231974177423?hash=item3602bd0a8f:g:hm4AAOSwMNxXWWMC
SAMSUNG UE32 UE37 UE40 UE46 D5500 / D5700 NAND K9GAG08U0E PROGRAMMED & TESTED
BN41-01660B BN94-04456A BN94-05307A BN41-01577A
116,00 PLN
Environ 27,57 EUR
Livraison : GRATUIT Przesy#322;ka zagraniczna - priorytetowa | Détails
Lieu où se trouve l'objet :
Sucha Beskidzka, Pologne
Lieu de livraison :
Europe
Conclusion = the software does not handle bad blocks = must put the QG-5X in the trash; And buy in POLAND programmed nands ???
So much wrong in your post.
Again BN41-01661 has NAND.
The software does handle bad blocks.
Maybe you should buy NAND chips programmed in Poland, it would save us the deception.
+1 Poland is renown for it's chips, potato chips that is. |
|
|
| Reply #87
anniel
2572 Posts |
|
| Reply #88
anniel
2572 Posts |
Posted - 09/15/2017 : 03:28:02
|
quote:
Originally posted by supervizeur
quote:
Originally posted by MANN France
quote:
Originally posted by thetan76
Great! The problem is to get the good copy of BN41-01661. Can you help me with one, please.
verry NOT Great != good copy of BN41-01661 ??? Does not have a NAND at all, only a BGA box for the firmware (UE xxD5000, not SMART TV)
good copy of BN41-01660 ( séries SMART TV UExxD5500 or UExxD5700 ) ??
I have been sending components in Canada for months, I have been waiting for a copy of NANS since !! = Must not dream; The GQ-5X does not work with bad blocks, or it's by chance (not matching the mappings of the [source] user data with the bad blocks, without "fiddling" addresses = a miracle !!) be brave !!
cela fait des mois que j'ai envoyé des composnts au CANADA , j'attends une copie de NANS depuis !! = faut pas rêver ; le GQ-5X ne fonctionne pas avec des bad blocks , ou c'est par hazard ( non correspondance sur les mappings des données utiles [source] avec les bad blocks [ cible ] ; sans "tripotage" des adresses = un miracle !! )bon courrage !!
Again, the NAND is IC1301.
A BGA box?
Why have you been sending components to Canada?
NANS?
Yes the GQ-5X works with bad blocks.
+1 Sending junk components to Canada is a new pass time for him.
|
|
|
| Reply #89
anniel
2572 Posts |
|
| Reply #90
anniel
2572 Posts |
Posted - 09/15/2017 : 03:33:23
|
quote:
Originally posted by supervizeur
quote:
Originally posted by MANN France
C'est incroyable être aussi incompétent! Bien sur que le BN41-01661 a un NAND c'est un KFG1GN6W2D.
True.
quote:
Originally posted by MANN France
cartes mères compatibles ,; pas de PB avec la mémoire ( BN41_01661 = n'en a pas
False IC1101, IC1102, IC1301 etc...
quote:
Originally posted by MANN France
Stupid!> = Download the service manual =
Compatible motherboards; No PB with memory (BN41_01661 = does not have one
False all boards have memory chips.
quote:
Originally posted by MANN France
éléchargez le service manual , et vous verrez les différences !!=
https://elektrotanya.com/?q=keres puis Search:
UE40D5500
OK
https://elektrotanya.com/?q=showresult sélectionner = Hits: 3 Requested strings: UE 40 D 5500
Le Doksi neve Tip. Kat. Alkat. Méret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
et vous avez tout ( diverses versoins , diverses cartes mères , etc ))
Download manual service, and you will see the differences !! =
Https://elektrotanya.com/?q=keres then Search:
UE40D5500
OK
Https://elektrotanya.com/?q=showresult select = Hits: 3 Requested strings: UE 40 D 5500
The Doksi neve Tip. Kat. Alkat. Meret
Download
SAMSUNG UE32-37-40-46D55XXR D57XXRS UE40D5500 CHASSIS U66A UE32-37-40-46D50XXPW U57A UE19-22-27D40XXNW U57B pdf TV SM 78979 KB
And you have everything (various payments, various motherboards, etc))
Everybody here knows how to download poor man's service manuals.
quote:
Originally posted by MANN France
p 4-139 = U57A – UD40XX (32") = NB41_01661 = NO anny NAND
False IC1301
quote:
Originally posted by MANN France
Qui est ce "NANS" à qui vous avez envoyer ces "composnts"?
Yes, I would like to know!
quote:
Originally posted by MANN France
alors arrêtez de dire des conneries , mon cher !!j'ai expédié au CANADA ( votre ingénieur logiciel ! ) , des échantillons et un DVD ROM , il y a déja bien des mois ( adresse donnée par le support produit = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. Je pars en vacances , et vous feriez bien d'en prendre aussi .
So stop telling bull****, my dear !! I shipped to CANADA (your software engineer!), Samples and a DVD ROM, many months ago (address given by product support = Mr Hxxx Chxxx 7xxx Paxxxxx Dr.Burnaby, BC Vxxxxx3xxxX 2
Canada) mail = 23/04/2017 19h05. I'm going on vacation, and you'd better take some too!
To whom are you directing this comment?
quote:
Originally posted by MANN France
C'est incroyable être aussi incompétent! = yes! == for only you !!
I know you are incompetent but for who?
That's crazy! |
|
|
| Reply #91
Makoto69
2 Posts |
Posted - 11/23/2018 : 05:41:35
|
quote:
Originally posted by anniel
quote:
Originally posted by supervizeur
quote:
Originally posted by GQ5XSupport
MANN France please use proper English. I copy and paste your text and Google cannot translate it.
I tried Sizegentics for long time without results and it almost. Things changed with Phallosan but a gain of only 1 inch. You can check the details here https://buffaloreport.com/phallosan-forte-review-results/.
What he needs is this.
Capital FALSE... It is not true that GQ-5X universal programmer is suitable with Windows 10 Only. Any version of Windows will be fine.] |
Edited by - Makoto69 on 01/22/2019 05:07:28 |
|
|
| Reply #92
anniel
2572 Posts |
Posted - 11/23/2018 : 06:01:55
|
quote:
Originally posted by Makoto69
Capital FALSE... It is not true that GQ-5X universal programmer is suitable with Windows 10 Only. Any version of Windows will be fine.
You are correct. |
|
|
| Reply #93
Verreda
11 Posts |
Posted - 05/05/2024 : 23:09:54
|
| Embarking on the journey of writing a literature review can be daunting, but it doesn't have to be a solitary endeavor. Through a serendipitous discovery, I found a website where adept writers offer their skills to aid individuals like myself. Their insights https://literaturereviewwritingservice.com/ help writing a literature review and proficiency transformed my writing process, leaving me grateful for the invaluable assistance. |
Edited by - Verreda on 05/05/2024 23:10:16 |
|
|
| |
Topic |
|
Windows version for GQ-5X
Forum Locked
