MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Confused about AVR ISP
 New Topic  Reply to Topic
 Printer Friendly
Author  Topic Next Topic  

tuc

USA
8 Posts

Posted - 04/30/2026 :  16:52:45  Show Profile  Reply with Quote
Hi,

Trying to program an ATMEGA328P. I understand that this can be done with my GQ-4x4 by using an AVRISP. The problem is that my chips aren't in a device that can be programmed via ISP. What do I need to get to be able to program it? Everything I find is the programmer side, not the other side of the cable. Specific product names appreciated.
Reply #1

anniel

2623 Posts

Posted - 05/01/2026 :  10:35:12  Show Profile  Reply with Quote
quote:
Originally posted by tuc

Hi,

Trying to program an ATMEGA328P. I understand that this can be done with my GQ-4x4 by using an AVRISP. The problem is that my chips aren't in a device that can be programmed via ISP. What do I need to get to be able to program it? Everything I find is the programmer side, not the other side of the cable. Specific product names appreciated.



Only power is required.
Go to Top of Page
   Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000