MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 usb		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

baka yaro

USA
2 Posts
Posted - 11/13/2007 :  09:58:42  Show Profile
Is it possible to use an usb port to read/write to an eprom? I'm using a newer laptop that has only usb ports to use. I have an adapter that is usb to parallel(db25). I have tried hooking the usb to parallel and I get the error message to check power and connection. All three lights are lite too(Vpp, program, power)

Thanks you
Edited by - baka yaro on 11/13/2007 14:25:02
Reply #1

pic

United Kingdom
3 Posts
Posted - 11/13/2007 :  13:56:23  Show Profile
iv got a serial to usb for a vellman kit
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 11/13/2007 :  20:04:14  Show Profile
The parallel port willem will not work on USB-LPT adapter.

The only USB version Willem is GQ-3X is available.
See:
www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4225
Go to Top of Page
Reply #3

baka yaro

USA
2 Posts
Posted - 11/13/2007 :  23:08:18  Show Profile
So in other words there is no possible way to use the board with a usb except buy a new board with usb capabilities??
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 11/14/2007 :  00:09:08  Show Profile
Yes.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000