MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Some questions		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Xander

6 Posts
Posted - 12/10/2008 :  19:12:45  Show Profile
Hi guys,

I recently bought a dual power Willem Programmer (Standard PCB3B), I also bought a 16bits adapter.

I have two questions:

I purchased a Parallel to USB adapter. Do you think there is a way to make the Willem programmer works with my laptop that way? My laptop doesn't have a parallel port. So far it doesn't seem to work. The VDD LED light up, but the software doesn't seem to communicate with the EPROM programmer.

I also purchased a 16bits adapter. And after playing around a little bit with it, I cannot find how I am supposed to connect it with my Willem board. How does it work? I see connections under the adapter, but there are 36 pins, it cannot connect into the 32 pins connector of the Willem.

Thank you for your time.
Edited by - Xander on 12/10/2008 19:14:44
Reply #1

ZLM

2945 Posts
Posted - 12/10/2008 :  20:20:31  Show Profile
The USB-Parallel does not work on this programmer.

The V2 16 bit EPROM adapter is for both PCB3B and USB type GQ-4X. So, you need to cut off first two row pins in order to fit in 32 pin ZIF programmer.
Go to Top of Page
Reply #2

Xander

6 Posts
Posted - 12/11/2008 :  07:16:35  Show Profile
Thank you for your input ZLM.

You helped me realize that I might not have bought the good EPROM programmer for my needs. I am currently in communication with McuMall to buy a more recent unit.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000