MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Topwin 2049 traduction fiasco!		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

ra2ven

2 Posts
Posted - 04/16/2009 :  10:42:36  Show Profile
hello, i bought a top2049 recently and i see that there are some words whitout traduction in the software.

I need specially this:

In config (for pic16f84a), above "Config (bit)" there is a tab
whit four options whitout traduction.

Otherwise, if anybody can explain me the mean of the words below "Config (bit)", i would appreciate too.

Please, help.
Reply #1

oozelot

Italy
4 Posts
Posted - 04/16/2009 :  11:50:17  Show Profile
you can find the minning of config bit into pic16f84a datasheet

CP CP CP CP CP CP DP CP CP CP PWRTE WDTE FOSC1 FOSC0
bit13 bit0
R = Readable bit
P = Programmable bit
- n = Value at POR reset
u = unchanged
bit 13:8 CP: Program Memory Code Protection bit
1 = Code protection off
0 = Program memory is code protected
bit 7 DP: Data Memory Code Protection bit
1 = Code protection off
0 = Data memory is code protected
bit 6:4 CP: Program Memory Code Protection bit
1 = Code protection off
0 = Program memory is code protected
: Power-up Timer Enable bit
bit 3 PWRTE
1 = Power-up timer is disabled
0 = Power-up timer is enabled
bit 2 WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1:0 FOSC1:FOSC0: Oscillator Selection bits
11 =RC oscillator
10 =HS oscillator
01 =XT oscillator
00 =LP oscillator
Go to Top of Page
Reply #2

tinhead

Germany
10 Posts
Posted - 04/16/2009 :  12:32:10  Show Profile
traduction ? i assume you mean translation.

Probably you have to download latest software version - i have v5.68 - no issues, there is everything in english.
Go to Top of Page
Reply #3

ra2ven

2 Posts
Posted - 04/19/2009 :  02:42:53  Show Profile
Its translation, my english......

I couldnt find the latest software, if someone could put a link i would appreciate

Thank you all
Go to Top of Page
Reply #4

tinhead

Germany
10 Posts
Posted - 04/19/2009 :  07:19:50  Show Profile
it is always here - h**p://www.top2048.com/gb/tops/topwin5.exe

you can see in change log the date and version : h**p://www.top2048.com/gb/SoftRecord.txt

Version 5.69 E 2009-4-17
LATTICE GAL22V10B/D


thats the latest one...
Edited by - tinhead on 04/19/2009 07:21:21
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000