MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 PRG-017 USB PROGRAMMER		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

APACHAONE

USA
3 Posts
Posted - 06/14/2009 :  18:51:38  Show Profile
I need help with how to set up programmer to talk to a PIC16F876.I am very new to this and in need of help.
NEWBY WILLING TO LEARN!
Reply #1

mcumall

78 Posts
Posted - 06/15/2009 :  07:07:49  Show Profile
See more inof from:
http://www.mcumall.com/forum/forum.asp?FORUM_ID=8

Programming steps:

1. Connect the programmer.
2. Start the software.
3. Select the chip type from the software.
4. Place the chip in the ZIF socket based on the software indication on ZIF socket.
5. Load the .hex file.
6. Click on "Program" button to program the chip.
7. If no error message, then the chip is progrmmed correctly.
Go to Top of Page
Reply #2

mr.x

2 Posts
Posted - 10/18/2009 :  13:06:53  Show Profile
hello

in the cellar i found some old eproms (27c128, 27c512 and a mc68705p) and would like to know if i can read/write them with my usb pic programmer and if with what configuration?
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 10/20/2009 :  07:34:56  Show Profile
The programmer supports 27c128, 27c512. But it does not support mc68705p.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000