MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Getting Error with Program using Usb programmer...		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

whofarted

2 Posts
Posted - 10/20/2009 :  10:09:30  Show Profile
Hey, I am having a problem when I go to program the 12f683...Says the programmer doesn't recognize the (12f683) processor..Then I continue anyway and I get this error message:

ROM Error at 0x0000
Good 0x3000
Bad 0x3FFF

Any ideas? Thank you
Reply #1

whofarted

2 Posts
Posted - 10/21/2009 :  16:54:35  Show Profile
There has to be someone who knows the answer to this.
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 10/25/2009 :  14:22:21  Show Profile
check your chip if it is on the correct position of ZIF socket.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000