MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 usbicd2.5 problem		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Larrye1428

Canada
4 Posts
Posted - 10/31/2009 :  05:24:40  Show Profile
Just got a USBICD2.5 and have the following message:
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to MPLAB ICD 2
ICDWarn0020: Invalid target device id (expected=0x90, read=0x0)
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 ready for next operation

What does this mean?
(using zif socket with correct jumpers and PIC18F4550)
other functions do not work as I expect them to.
Reply #1

ZLM

2945 Posts
Posted - 10/31/2009 :  13:41:45  Show Profile
The ICD2.5 does not detect the PIC18F4550.

It seems you did not place the chip on the ZIF socket.
Go to Top of Page
Reply #2

Larrye1428

Canada
4 Posts
Posted - 11/03/2009 :  05:33:49  Show Profile
The chip is in the zif socket, but does not seem to get any power
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 11/03/2009 :  10:13:20  Show Profile
check the jumper setting on ZIF adapter
Go to Top of Page
Reply #4

Larrye1428

Canada
4 Posts
Posted - 11/03/2009 :  16:25:29  Show Profile
Hi,
as stated the jumper is correct
(I am new to the USBIDC2.5 but have 40 years designing hardware)
Go to Top of Page
Reply #5

ZLM

2945 Posts
Posted - 11/04/2009 :  10:52:46  Show Profile
Somewhere mus be a connection/contacting problem. Check the cable, adapter ZIF contacting.
Go to Top of Page
Reply #6

Larrye1428

Canada
4 Posts
Posted - 11/04/2009 :  14:49:06  Show Profile
I have checked all of this and still not work
Go to Top of Page
Reply #7

ZLM

2945 Posts
Posted - 11/05/2009 :  08:18:29  Show Profile
You may need to send back the unit for a testing. email to support@mcumall.com
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000