MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Where is A19 on the Willem programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

stikyy

2 Posts
Posted - 10/25/2004 :  20:17:54  Show Profile
I am using the Dual Power Standard Willem Universal EPROM Programmer Kit with the TSOP48 adapter to program a AM29F800BB chip. I am getting write errors. I've read somewhere that i am supposed to connect a19 on the adapter to the a19 on the programmer. I clearly see a19 on the adapter but where is it on the programmer?
Reply #1

mcumall

78 Posts
Posted - 10/26/2004 :  22:35:08  Show Profile
The second pin of JP-1. JP-1 is a 8 pin connector. Located at left side of DIP. Start count from top.

There is a jumper setting diagram file in the CD.
Go to Top of Page
Reply #2

stikyy

2 Posts
Posted - 10/29/2004 :  16:11:42  Show Profile
Works like a charm. Thanks!
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.27 sec. Snitz Forums 2000