MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 2732a		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

tony

USA
5 Posts
Posted - 06/05/2010 :  03:49:54  Show Profile
which speed would be the best speed to program 2732a on a gx4 programmer? also what is the difference between a 250ns and a200ns eprom? thank you tony
Reply #1

ZLM

2945 Posts
Posted - 06/07/2010 :  06:40:13  Show Profile
"250ns and a 200ns" are speed of eprom operation. The speed in software is refering to programming speed. So, all speeds of programming should be OK as long as EPROM can be programmed and verified.
Go to Top of Page
Reply #2

tony

USA
5 Posts
Posted - 06/07/2010 :  13:31:53  Show Profile
thanks for the info. tony
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000