MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 serial to pci kaart		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

pb0ahx

Netherlands
4 Posts
Posted - 01/10/2011 :  05:27:49  Show Profile
hello all
sory for my writing enlisch
wy wil not working the serial poort to my willem
my brand new computer have no serial ports
but i put in a serial to pci cart
it wil notyet working
i see on my screen Hardware error chek power & connection
in the harware settings of my computer i see lpt1 now but i can not seen the epp or someting
pse some body can help
i am new
Reply #1

ZLM

2945 Posts
Posted - 01/11/2011 :  10:39:16  Show Profile
The port must be parallel LPT printer port. Not the serial port.

I thhink you need to set your printer port LPT1 address to 0x378, 0x278 or 0x3BC.
Then select correct port address from software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000