MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 GQ-3X and X24C44P ???		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

mark

Australia
10 Posts
Posted - 08/25/2011 :  00:29:10  Show Profile
I would like to be able to read and write to the XA4C44P chip, but can not find it in the GQ-3X menu, so i am unsure what position to place it on unit. or if i need holder to mount it.
I do have one that looks like will do the job came with GQ-3X unit on purchace and was supplied with a push in type 12F629 chip.<--- hope that is the adaptor i need to read X24C44P.

Im totally new to this even tho i have owned my programmer for a few years now.
Mark
Reply #1

ZLM

2945 Posts
Posted - 08/25/2011 :  17:15:55  Show Profile
No. The X24C44P not been supported.
Go to Top of Page
Reply #2

mark

Australia
10 Posts
Posted - 08/26/2011 :  16:55:45  Show Profile
will it or can it be added in the future ? how else would it be possible to read and write to this chip ?
any suggestions happily recieved.
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 08/27/2011 :  15:23:39  Show Profile
It can not be added eaily.

No plan to add this chip in recently. It is possible add this in in the future
Go to Top of Page
Reply #4

mark

Australia
10 Posts
Posted - 08/27/2011 :  16:59:37  Show Profile
what would it take to get this added ???, as i see other programmers have the ability, and im hoping it gets added very soon, as im sure im not alone as it is very commonly used in the australian automotive market.
Go to Top of Page
Reply #5

mark

Australia
10 Posts
Posted - 08/28/2011 :  13:59:28  Show Profile
any one know or suggest what will be needed to read/write to this chip. software/hardware ???
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000