MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Help PSOP44 adapter!		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Futte

Denmark
1 Posts
Posted - 04/01/2012 :  16:17:39  Show Profile
Hi, I need some Help on the PSOP44 adapter :


There is 2 jumpers on the adapter, one jumper seems to switch between 3 v and 6 v, and the other jumper seems to switch between 28F and 29F chips.



Is this correctly understood?



If it is correctly understood then does the jumper for 3v and 6v need to be out or in if I need to programme a chip with 3v?

And if I need to programme a 29F chip does the jumper for 28F and 29F need to be in or out to programme that chip?



Hope someone will help me, please.

Regards
Futte
Reply #1

bram380

Indonesia
19 Posts
Posted - 04/02/2012 :  08:52:46  Show Profile
3V/5V DIP switch option:
3V for 28LVxxx 29LVxxx
5V for 28Fxxx 29Fxxx

regards,
bram380
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000