MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 General Discuss
 programming N82S126N		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

superblomquist

3 Posts
Posted - 08/28/2012 :  04:55:28  Show Profile
Hello
I am repairing a computer Tavernier I built in France in 1983.
I need to program rom 126x4 type N82s126 or sn74LS387.
I dont know to do it
I have a universal programer gq usb
I could enter in the device.txt file but I dont know a lot of things. class etc...
thanks for help
Reply #1

superblomquist

3 Posts
Posted - 08/29/2012 :  22:49:44  Show Profile
Hello
I can give you more info about the 82S126
bipolar rom - 16 pins
Vcc 7 volt
programing : Vcc 8,75 volt and V on the output 18,5v
friendly
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 09/02/2012 :  20:16:22  Show Profile
unfortunately this chip is unable to support.
Go to Top of Page
Reply #3

superblomquist

3 Posts
Posted - 09/04/2012 :  07:46:39  Show Profile
Thanks for this answer.
Are you sure ?
there is no hope?
it's because they are ttl rom ?
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 09/10/2012 :  06:34:32  Show Profile
At least current programmer version does not supports this.
But it may be supported in the future.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000