MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 How to connect this 16bit adapter?		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

jensmaa

Germany
9 Posts
Posted - 12/17/2012 :  11:13:16  Show Profile
Hey there,

I bought an 16bit adapter but I'm not sure how to cennect it to my willem. Maybe you guys have a clue:

Below U3 are the pins which are locked into the ZIF socket.

h**p://www.jensma.de/upload/files/XQDQS8Ew__DSC_0457.jpg

This is the adapter:

h**p://www.jensma.de/upload/files/scriptY2G7pqP__DSC_0466.jpg

This is the connector where the adapter is connected to the willem with a cable:

h**p://www.jensma.de/upload/files/o0hmVSHf__DSC_0458.jpg

The backsite of the adapter:

h**p://www.jensma.de/upload/files/SldSZKIX__DSC_0469.jpg

These are the pins where the cable of the adapter will be connected to. I have no clue which way it should go in:

h**p://www.jensma.de/upload/files/PTl1QSAq__DSC_0465.jpg

I made a quick diagram:

h**p://www.jensma.de/upload/files/2wl52SMg__untitled.PNG

PS: Does anybody know what this "J2"-Jumper on the adapter is for?

Any help is much appreciated ;)
Reply #1

ZLM

2945 Posts
Posted - 12/19/2012 :  20:14:56  Show Profile
if you are programming 27C400, then you do not need to connect the cable. Others need address cable to be connected.
Go to Top of Page
Reply #2

jensmaa

Germany
9 Posts
Posted - 12/20/2012 :  06:53:27  Show Profile
Thanks for your answer!

This diagram h**p://www.ezoflash.com/willem/ep16bit42pin_mpu51.zip

had all the answers I needed :)
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000