| Author |
 Topic  |
|
|
Spiros
Greece
3 Posts |
 Posted - 03/21/2011 : 03:03:05
|
I 've bought recently a usb Pic Programmer from EasyTechnology.gr and I try to program a PIC18F4321. The problem is that the programmer is showing a chip with 28 pins and the Pic18F4321 has 40 pins. What I have to do?
Also I try to reprogram a PIC18F4455, but with choise BLANK , Erase Chek show me that:
ROM=Not Erased
EEPROM=Not Erased
ID=Erased
FUSED=Not Erased
When I try to Erase the chip, show me that the "chip has been Erased", but the chip has not been erased tottaly.
What happens?
Thanks
|
sm |
Edited by - Spiros on 03/21/2011 04:02:37
|
|
| Reply #1
ZLM
2945 Posts |
Posted - 03/21/2011 : 09:00:41
|
If your package is not supported, then you need to use ICSP mode to program it.
When erase, the BLANK button has two features, blank check and erase. Use ERASE option, |
 |
|
| Reply #2
Spiros
Greece
3 Posts |
Posted - 03/21/2011 : 10:13:50
|
| I have done Blank, Erase, the indication after the erase is: erased succesfuly, but the chip does not erase. I read the chip and the ROM has a code wrriten yet, different from FFFF |
sm |
|
|
| Reply #3
Spiros
Greece
3 Posts |
Posted - 03/24/2011 : 02:25:43
|
I have resently bought a USB PIC Programmer and I have tryied to program a PICF4455. The program had a bug, so I would like to change the program. I tryied to chek erase the program and the message was ROM not Erased, EEPROM not Erased, ID not Erased, FUSES not Erased. I erased the program and the message was "has been erased" , but the chip was not erased.
I tryied the same with the PIC18F4321 and the problem was the same.
I am effraid, that I do somthing wrong. Can you help me?
Also, I do not have a manual for the programmer.
Thanks in advance
|
sm |
|
|
| Reply #4
ZLM
2945 Posts |
Posted - 03/29/2011 : 09:27:38
|
Try to increase delay time for this chip. The default value is ProgramDelay=10 , try to use ProgramDelay=100.
Steps:
1. open the CHIPINFO.CID text file using windows Notepad.exe.
2. search the "CHIPname=18F4455"
3. change the ProgramDelay=10 to ProgramDelay=100.
4. file save.
5. start the software and try. |
|
|
| Reply #5
marcosbmx
Paraguay
1 Posts |
Posted - 01/24/2013 : 17:26:14
|
| I have the same problem with 18F4550. Now try what suggested but I still have the same error. Any other suggestions? |
|
|
| |
Topic |
|
usb PIC programmer failure
Forum Locked
