MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 jdm v2 enhanced pic18f2550		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

OM

2 Posts
Posted - 12/24/2011 :  21:08:19  Show Profile
Hi i just bought a jdm programmer im trying to program a pic18f2550 microchip

do i need to set the jumper's or do anything or
will it work by putting in straight into the socket


hears a pic

Image Insert:

19.82 KB
Edited by - OM on 12/24/2011 21:41:36
Reply #1

ZLM

2945 Posts
Posted - 12/27/2011 :  12:01:39  Show Profile
This should work.
Go to Top of Page
Reply #2

OM

2 Posts
Posted - 12/27/2011 :  19:02:07  Show Profile
The green light blink when it trys to real the pic
but it doesnt detect the chip

JP2 pins 2-3 have jumpers
the ICSP has no jumper

is the pic faulty or the programmer

im trying to program Pic18f2550-I/sp
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 12/29/2011 :  10:35:19  Show Profile
Looks OK.

Try followings:

1. Confrim your RS232 cable is working. and you RS232 port is not the USB-serial adapter.
2. Get another different type PIC chip and see if it works.
3. Confirm your chip is a good chip.
4. Try to program the chip via ICSP port connection. (5 wires connection)
Go to Top of Page
Reply #4

puppydogfish

USA
1 Posts
Posted - 04/02/2015 :  00:40:17  Show Profile
The green light blink when it trys to real the pic
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000