MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 my TOP2005 report no chip placed		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

sonhai

2 Posts
Posted - 11/16/2007 :  20:35:35  Show Profile
Hi all!
I've had my TOP2005 for five months now last week when i try to program a 89S52 my TOP say no chips placed i can still check ttl ic's
but all my PAL and MCU function when read or write says no chip placed any suggestions please help.
sonhai
Reply #1

ZLM

2945 Posts
Posted - 11/29/2007 :  09:59:51  Show Profile
Clean up your programmer ZIF socket and your chip pins, espeically the GND pin. See if it makes any difference.
Go to Top of Page
Reply #2

sonhai

2 Posts
Posted - 12/01/2007 :  22:10:08  Show Profile
Thanks for reply ZLM
no my ZIF socket is ok so is my USB chip, my voltage inverter is ok (i still has 15v out) all my uln2003 driver ic as well as smd transistors are ok, my problem might be in the FPGA but i don't have the firmware to reflash it, anyhow! i'm tired of invisible manufacturer i'm ordering a new Xeltek 280U. Costs more but worth it, buying TOP was a sad experience.
have a good day
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000