MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 25Q128JVFQ Support		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

bkrios

USA
3 Posts
Posted - 04/09/2019 :  07:51:19  Show Profile  Reply with Quote
I'm trying to read from a Winbond 25Q128JVFQ SOIC-16. I'm using the ADP-098 adapter, but my reads result in FFFFFF for device ID and the contents read as FF.

The datasheet for this device can be found here: https://www.winbond.com/resource-files/w25q128jv%20spi%20revc%2011162016.pdf

Any suggestions?
Reply #1

anniel

2572 Posts
Posted - 04/09/2019 :  08:10:08  Show Profile  Reply with Quote
quote:
Originally posted by bkrios

I'm trying to read from a Winbond 25Q128JVFQ SOIC-16. I'm using the ADP-098 adapter, but my reads result in FFFFFF for device ID and the contents read as FF.

The datasheet for this device can be found here: https://www.winbond.com/resource-files/w25q128jv%20spi%20revc%2011162016.pdf

Any suggestions?
Which device did you select in the software?
Go to Top of Page
Reply #2

bkrios

USA
3 Posts
Posted - 04/12/2019 :  08:00:16  Show Profile  Reply with Quote
I've tried a few. I guessed that "W25Q128BV*SOIC16 would be close enough, but I still can't get it to read.
Go to Top of Page
Reply #3

anniel

2572 Posts
Posted - 04/12/2019 :  09:08:06  Show Profile  Reply with Quote
quote:
Originally posted by bkrios

I've tried a few. I guessed that "W25Q128BV*SOIC16 would be close enough, but I still can't get it to read.
I think it should work. Any flux residues left on the pins from unsoldering?
Go to Top of Page
Reply #4

bkrios

USA
3 Posts
Posted - 04/12/2019 :  18:17:29  Show Profile  Reply with Quote
I'll check!
Go to Top of Page
Reply #5

anniel

2572 Posts
Posted - 04/13/2019 :  03:49:58  Show Profile  Reply with Quote
quote:
Originally posted by bkrios

I'll check!
Keep in mind that if you tried a 5V device definition you may have fried your chip.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000