MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Can't write successfully to AM29F040-90PC		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

telengard

USA
1 Posts
Posted - 01/30/2020 :  13:34:59  Show Profile  Reply with Quote
This is the first chip I've had issues w/ burning

I have the device set for AM29F040B, and it detects OK.
Can only get it to write at -2 speed, and it goes to 100% but then fails to verify w/ Address=0x00000000, Device=0x10, Buffer=0xf3.

Reading back shows the contents of the chip as received from eBay.

Any ideas on what I might be doing wrong?
Reply #1

anniel

2572 Posts
Posted - 01/30/2020 :  16:02:43  Show Profile  Reply with Quote
quote:
Originally posted by telengard

This is the first chip I've had issues w/ burning

I have the device set for AM29F040B, and it detects OK.
Can only get it to write at -2 speed, and it goes to 100% but then fails to verify w/ Address=0x00000000, Device=0x10, Buffer=0xf3.

Reading back shows the contents of the chip as received from eBay.

Any ideas on what I might be doing wrong?
eBay=FAKE.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000