| Author |
 Topic  |
|
|
Nelson Afonso
Brazil
2 Posts |
 Posted - 08/16/2023 : 07:13:49
|
I'm trying to burn an am28f512 eprom but the gq4 programmer stops at 25%. I have to disconnect and close the software to get it working again. I am using plcc32 - dip32 adapter. I changed port uses, pc. nothing works.
I slowed it down but it didn't work. gq4 Read, identify, but do not complete write. What do I do? |
|
| Reply #1
anniel
2572 Posts |
Posted - 08/16/2023 : 07:19:26
|
quote:
Originally posted by Nelson Afonso
I'm trying to burn an am28f512 eprom but the gq4 programmer stops at 25%. I have to disconnect and close the software to get it working again. I am using plcc32 - dip32 adapter. I changed port uses, pc. nothing works.
I slowed it down but it didn't work. gq4 Read, identify, but do not complete write. What do I do?
Read is good? |
 |
|
| Reply #2
Nelson Afonso
Brazil
2 Posts |
Posted - 08/16/2023 : 09:47:27
|
quote:
Originally posted by anniel
quote:
Originally posted by Nelson Afonso
I'm trying to burn an am28f512 eprom but the gq4 programmer stops at 25%. I have to disconnect and close the software to get it working again. I am using plcc32 - dip32 adapter. I changed port uses, pc. nothing works.
I slowed it down but it didn't work. gq4 Read, identify, but do not complete write. What do I do?
Read is good?
yes, read is good |
|
|
| Reply #3
anniel
2572 Posts |
Posted - 08/17/2023 : 07:23:04
|
quote:
Originally posted by Nelson Afonso
quote:
Originally posted by anniel
quote:
Originally posted by Nelson Afonso
I'm trying to burn an am28f512 eprom but the gq4 programmer stops at 25%. I have to disconnect and close the software to get it working again. I am using plcc32 - dip32 adapter. I changed port uses, pc. nothing works.
I slowed it down but it didn't work. gq4 Read, identify, but do not complete write. What do I do?
Read is good?
yes, read is good
Does it pass voltage tests? |
Edited by - anniel on 08/19/2023 08:54:08 |
|
|
| |
Topic |
|
AM28f512
Forum Locked
