MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 FUSE settings for pic18F2450		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

aERonAUtical96

2 Posts
Posted - 12/01/2008 :  22:31:29  Show Profile
Having problems w/ the PRG-017 programming the FUSE config bits on the PIC18F2450 chip. I attempt to program a HEX file w/ appropriate FUSE values. The hex appears to be set, but the FUSE settings will not. What setting am I missing?
Reply #1

aERonAUtical96

2 Posts
Posted - 12/02/2008 :  07:11:09  Show Profile
Why will the software not erase the FUSE configuration? It won't set the config bit values from the HEX file
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 12/03/2008 :  11:58:45  Show Profile
Does the software load the configuration bit correctly from the hex file?
Try to increase the delay time in ".cid" file.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000