MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 start advices		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

ttteee

4 Posts
Posted - 03/09/2009 :  14:30:58  Show Profile
received today my gq-4x
after a couple of problems I mangaed to set it up and tried to play around with a HN27C4096G-12

a) the picture says adapter needed, but the eprom is 40 pin and fits the programmer, why?

b) can't do anything except reading, it's because it's not well erased?
Reply #1

ZLM

2945 Posts
Posted - 03/09/2009 :  18:37:54  Show Profile
a), The 27C4096 needs 16 bit EPROM adapter. The GQ-4X is Willem family programmer, so it ueses Willem adapters.
b), The reading is not correct without a correct adapter.

So, one of the following adapter is needed:
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4290

OR

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4289
Go to Top of Page
Reply #2

ttteee

4 Posts
Posted - 03/10/2009 :  11:15:20  Show Profile
ok, sigh, if I knew I would have included it in the same shipping :(
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000