| Author |
 Topic  |
|
|
yelenavik
USA
31 Posts |
 Posted - 03/17/2009 : 18:07:11
|
| Hello,could You add Amic A29L040L-70,because show ID failed,get ID # 3792,but anyway can read but cant erase go to 45% then failed.Thank's. |
|
| Reply #1
ZLM
2945 Posts |
Posted - 03/18/2009 : 08:11:51
|
Add this line to devices.txt:
Name="A29L040",ID="3792",Class="29F040B",Category="FLASH",,VCC="3.6V",MFG="AMIC"; |
 |
|
| Reply #2
yelenavik
USA
31 Posts |
Posted - 03/19/2009 : 12:53:04
|
| Thank's ZLM.Now check ID ok I can read,erase,even write but verified failed not depend from speed.(I unprotect before operation).May be need external power suply? |
|
|
| Reply #3
ZLM
2945 Posts |
Posted - 03/19/2009 : 20:21:58
|
Not the power supply issue.
Did you do the blank check after erase? this will check if the erase works.
Does the chip protected?
Do you have second chip for testing?
Is it used chip or new chip?
How do you know the chip is not the bad chip? |
|
|
| Reply #4
yelenavik
USA
31 Posts |
Posted - 03/19/2009 : 20:55:49
|
| Yes chip blank ok,about protected i dont know.I have 2 chips used.second same .I dont know good chips or bad. |
|
|
| Reply #5
ZLM
2945 Posts |
Posted - 03/19/2009 : 22:24:12
|
| Does the chip is blank initailly? or the erase works? |
|
|
| Reply #6
yelenavik
USA
31 Posts |
Posted - 03/20/2009 : 03:36:50
|
| yes erase work, all FF. |
|
|
| Reply #7
yelenavik
USA
31 Posts |
Posted - 03/20/2009 : 22:45:44
|
| Every time different address,it s may be bad connection in PLCC-32,I will try clean later pins of chip |
|
|
| Reply #8
ZLM
2945 Posts |
Posted - 03/20/2009 : 23:10:02
|
| Barely put the chip in the socket, this will help the pin contacting. |
|
|
| Reply #9
sucuka
Hungary
2 Posts |
Posted - 08/17/2013 : 02:56:26
|
Hi!
I trying a reprogram a BIOS chip of FSC Amilo Pi 1536 notebook. The chip is AMIC A29L800ATV, but this chip is not in the devices.txt. I select this device for program (based on datasheets): AMD AM29F800T and ignore "ID-check" and Jumper leave in the 3V position! The chip is programmed and verified successfully, and the notebook is working properly.
ZLM: Please verify this line, if its correct, please add the devices.txt in next version of GQ-program.  
Name="A29L800ATV",ID="371A",Class="29F800T",Category="FLASH",MFG="AMIC",Adapter="ADP-003 TSOP48 8 BIT Mode",RVPP="3V";
Pictures:
Image Insert:
131.14 KB
Image Insert:
125.89 KB
Image Insert:
145.94 KB
Rgds! |
Creator of Hungarian Language of GQ-USBPrg. |
|
|
| Reply #10
ZLM
2945 Posts |
Posted - 08/17/2013 : 22:22:39
|
Great job.
Thank you. We will put this device into next software supported list.
Please let me know what adapter you used.
|
|
|
| |
Topic |
|
AMIC in GQ-4
Forum Locked
