MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Programming NEC D2764		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Prfeno

USA
1 Posts
Posted - 12/28/2006 :  08:33:04  Show Profile
My programmer use to work fine programming this EPROM. I then installed the latest software update. Now when I attempt to program I continually get an 00000error! Chip=ff File=80 or vice versa. Any suggestions would be greatly appreciated.

Thank you.

Phil
Reply #1

ZLM

2945 Posts
Posted - 12/29/2006 :  01:47:44  Show Profile
No enough DC current? check the power level from software menu. If it's less than 7, use a strong and short USB cable.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000