MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 PCB3B Programer HELP		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

prm8040

Australia
2 Posts
Posted - 01/05/2007 :  02:12:18  Show Profile
Hi all, I have a Dual Power Willem Universal EPROM Programmer and im trying to program up some 27C32 eproms.
I got an eraser and have erased my proms.
When I try to program the proms this error comes up

Error at 0x000A0F Chip = 0xFF buffer = 0x6F

Any Ideas as to what I am doing wrong???
Any help will be greatly appreciated.

Thanks
Paul.
Edited by - prm8040 on 01/05/2007 23:53:18
Reply #1

backbiter17

Slovenia
23 Posts
Posted - 01/06/2007 :  00:25:03  Show Profile
did you check chip if it is empty?
br,a
Go to Top of Page
Reply #2

prm8040

Australia
2 Posts
Posted - 01/06/2007 :  00:45:43  Show Profile
Yes I have checked the eproms if they are empty. I have erased 10 eproms and have tryed to program 8 of them and with all 8 I get the same error.
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 01/08/2007 :  11:53:21  Show Profile
check the Vpp reading and DIP/Jumper setting.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000