MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Using the AVR JTAG ICE and AVRISP ISP programmer
PRG036 with AVRStudio 4.19 (the last)
Forum Locked
Printer Friendly
Author
Topic
dupontg
16 Posts
Posted - 01/25/2012 : 03:29:45
Hello,
I just received your AVRISP/JTAG programmer V4 from Ebay.
ref under the box:"AVRISP+JTAGICE 50207"
USB driver OK selected as COM2
Starting AVRStudio 4.19
It's OK in AVRISP ;
Refuse connection when i select JTAGICE.
I have try'd to upgrad with new Jtag firmware..OK for the upgrad but allways impossible to connect.
My prototyp card is equiped with 2 connector,one ICE and one Jtag.
I have another Jtag debugger who run perfectly when connected with this card.
thank you
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000
PRG036 with AVRStudio 4.19 (the last)
Forum Locked
Posted - 01/25/2012 : 03:29:45
