MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Using The Enhanced/Dual power Willem Programmer
PCB3b hardware error
Forum Locked
Printer Friendly
Author
Topic
hackbar
1 Posts
Posted - 06/12/2012 : 14:36:46
I have a PCB3b dual-power Willem that I've been modifying to do 25V VPP. I replaced two transistors, the inductor, and the 7805.
VPP and VCC are now great in test mode, however when I try to program the software gives me "Hardware error: check power & connection".
How do I fix this?
I started a topic on the ezoflash forums, but it's sat unanswered for a while:
h**p://
www.ezoflash.com/forum/viewtopic.php?f=10&t=5659
Reply #1
ZLM
2945 Posts
Posted - 06/18/2012 : 12:58:01
This is nothing to do the VPP.
It related to your data cable connection and power cnnection.
Use self test procedure to check it.
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.06 sec.
Snitz Forums 2000
PCB3b hardware error
Forum Locked
Posted - 06/12/2012 : 14:36:46
