MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Programmer for car ECU		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Dimitrios

Greece
2 Posts
Posted - 06/15/2013 :  01:00:30  Show Profile
Hello !I am about to buy a programmer.Truth is I am not really into this.
I currently flash cars via obd2 so I am really really confused.
Your programmer does a lot eeprom/flash that I already work but what other adapters would I need ?
Reply #1

benaknoun

Spain
133 Posts
Posted - 06/15/2013 :  18:00:23  Show Profile
Hi
It depends on the IC's you work on, there are different adapters for different IC
Go to Top of Page
Reply #2

Dimitrios

Greece
2 Posts
Posted - 06/17/2013 :  06:13:51  Show Profile
Sorry I didnt ask the question properly.
I found what I wanted here
http://www.mcumall.com/support/EpromApplicationList.pdf

I wanted a list so I can compare what your programmer supports :) thank you again
Go to Top of Page
Reply #3

benaknoun

Spain
133 Posts
Posted - 06/17/2013 :  14:55:16  Show Profile
I have the GQ-4X and it's good, but better check if it supports the chips you will be working on..

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4312
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000