MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ4X - W25Q64FW support
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

khaahk

22 Posts

Posted - 05/22/2015 :  02:37:34  Show Profile  Reply with Quote
Datasheet:
h**ps://www.winbond.com/resource-files/w25q64fw_revg_aug1414_sfdp_dms.pdf

The chip is 1.8V, what line should be added to devices.txt


Edited by - khaahk on 05/22/2015 02:37:58
Reply #1

ZLM

2945 Posts

Posted - 05/22/2015 :  09:21:53  Show Profile  Reply with Quote
This chip needs a 1.8V SPI adapter. The programmer ZIF socket provides a 3.6V VCC minimum.

You can make a one yourself.

See EZOFlash 1.8V SPI adapter:

h**p://www.ezoflash.com/scriptdapters.htm
Go to Top of Page
Reply #2

laptech

United Kingdom
58 Posts

Posted - 07/23/2015 :  02:44:38  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

This chip needs a 1.8V SPI adapter. The programmer ZIF socket provides a 3.6V VCC minimum.

You can make a one yourself.

See EZOFlash 1.8V SPI adapter:

h**p://www.ezoflash.com/scriptdapters.htm



I was thinking of making this adapter because I have a couple of 1.8v chips to program but looking at the pictures I am confused as to how this connects to the GQ-4X. I can see where the 8 pin SPI adapter plugs in (2 rows of 4 connectors) but it appears there is also another 8 pin connector which I assume is supposed to connect to the programmer but the GQ-4X has not such connector so if I make this 1.8v adapter, how do I connect it to the GQ-4X?

many thanks
Rog

Laptronics UK LTd. Specialist motherboard repair.
Go to Top of Page
Reply #3

ZLM

2945 Posts

Posted - 07/24/2015 :  23:51:16  Show Profile  Reply with Quote
I modified adapter drawing from original drawing of EZoFlash adapter.



Image Insert:

43.6 KB
Go to Top of Page
Reply #4

long123

China
32 Posts

Posted - 08/06/2015 :  20:03:50  Show Profile  Reply with Quote

This chip needs a 1.8V SPI adapter. The programmer ZIF socket provides a 3.6V VCC minimum.
Go to Top of Page
Reply #5

ZLM

2945 Posts

Posted - 09/08/2015 :  12:26:48  Show Profile  Reply with Quote
ADP-099 See:

http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4630


[b]Image Insert:[/b][br][br][size=1] 71.31 KB[/size=1]
Go to Top of Page
Reply #6

pashha

Turkey
20 Posts

Posted - 05/31/2017 :  08:16:31  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

I modified adapter drawing from original drawing of EZoFlash adapter.



Image Insert:

43.6 KB



Dear, Can you write more details about the resistors? (Watt ? )

GQ-4X
Go to Top of Page
Reply #7

anniel

2572 Posts

Posted - 06/01/2017 :  05:23:22  Show Profile  Reply with Quote
quote:
Originally posted by pashha

Dear, Can you write more details about the resistors? (Watt ? )



No real importance, any wattage you have on hand will do fine.
Go to Top of Page
Reply #8

supervizeur

462 Posts

Posted - 06/04/2017 :  09:02:23  Show Profile  Reply with Quote
quote:
Originally posted by anniel

quote:
Originally posted by pashha

Dear, Can you write more details about the resistors? (Watt ? )



No real importance, any wattage you have on hand will do fine.



+1
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000