MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X : adress=0x008000 buffer=0x04 eprom=0x00		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

gatts

3 Posts
Posted - 06/11/2016 :  15:20:52  Show Profile  Reply with Quote
Hello,

Today I didn't manage to write on eprom M27C801 whereas it worked well last time I used my GQ-4X.

I tried to write on other M27C801 eproms, to erase them again before writing. I tried to change USB cable, I tried with another PC, I tried with other eprom references and each time I get the same error message : adress=0x008000 buffer=0x04 eprom=0x00
I also ran the voltage diagnostic and the results were ok.

Do you have any idea of what is wrong ?
Reply #1

ZLM

2945 Posts
Posted - 06/11/2016 :  16:13:29  Show Profile  Reply with Quote
The chip need to be erased and pass he blank check before write new data. Also, you should be able to get correct chip ID.

Check the pin contacting on A15. See datasheet for the exact pin number.
Go to Top of Page
Reply #2

gatts

3 Posts
Posted - 06/11/2016 :  16:35:33  Show Profile  Reply with Quote
Thank you for your answer. I erased the chip and it passed the blank test, but I get the same error message.

When you said to check pin corresponding to A15, does it means checking that this pin is not oxidized ?

Thanks again for your support.
Go to Top of Page
Reply #3

gatts

3 Posts
Posted - 06/12/2016 :  06:26:56  Show Profile  Reply with Quote
I finally managed to write on the EPROMs after erasing them for more than two hours. I don't understand why because when the writing failed, the blank test was passed with less than one hour of erasing
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 06/17/2016 :  21:12:46  Show Profile  Reply with Quote
Your EPROM is too old. It may not last long time.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000