MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Help programming 28F008		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Vaughan14

2 Posts
Posted - 08/14/2017 :  02:48:31  Show Profile
Hi, I just purchased a GQ-4x4 and the adp-082 + 077 adapters.

I have put the 082 into the bottom pins of the programmer and the 28F008 into the top pins of the 077 adapter.

I have placed the 077 in the tsop40b slot on the adp-082 and have selected TE28F008S5 in the programmer device list.

I have tested a LH28f008SAT and a E28F008SA but I am failing the ID check and the erase, does anyone have any ideas?

Cheers.
Reply #1

Vaughan14

2 Posts
Posted - 08/23/2017 :  02:54:11  Show Profile
After doing some testing and getting other tsop 40 chips to burn first go I have come to the conclusion there is a problem with the software.

I have contacted support, hopefully this gets sorted out otherwise I dropped alot of money on something that is useless to me.
Go to Top of Page
Reply #2

anniel

2572 Posts
Posted - 12/30/2017 :  08:28:21  Show Profile
quote:
Originally posted by Vaughan14

Hi, I just purchased a GQ-4x4 and the adp-082 + 077 adapters.

I have put the 082 into the bottom pins of the programmer and the 28F008 into the top pins of the 077 adapter.

I have placed the 077 in the tsop40b slot on the adp-082 and have selected TE28F008S5 in the programmer device list.

I have tested a LH28f008SAT and a E28F008SA but I am failing the ID check and the erase, does anyone have any ideas?

Cheers.


Fake chips?
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000