MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Quick question on ADP-054 adapter		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

mathewbeall

USA
5 Posts
Posted - 11/07/2017 :  15:47:35  Show Profile  Reply with Quote
Hello!

There are 3 different positions that the ADP-054 can fit in the GQ-4x4 programmer.

It can sit fully at the top (towards the lever), in the middle, or flush with the bottom.

What is the correct way? This is probably self evident - but I can't find it documented anywhere!

Thanks,

Matt
Reply #1

anniel

2572 Posts
Posted - 11/17/2017 :  08:04:22  Show Profile  Reply with Quote
quote:
Originally posted by mathewbeall

Hello!

There are 3 different positions that the ADP-054 can fit in the GQ-4x4 programmer.

It can sit fully at the top (towards the lever), in the middle, or flush with the bottom.

What is the correct way? This is probably self evident - but I can't find it documented anywhere!

Thanks,

Matt


You can find this information in the Device Location section.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000