| T O P I C R E V I E W |
| busterk |
Posted - 06/20/2009 : 10:35:13
- I have problems with the configuration flags of the pic (0x2007)
- I'm setting the flags manually which results in the word 0x3F18
- When I'm programming the pic the CFG gets written as 0x3FFF all "1".
-Why could that be ?
- When my program was smaller it worked.
|
| 4 L A T E S T R E P L I E S (Newest First) |
| busterk |
Posted - 06/22/2009 : 11:20:17
quote:
Originally posted by ZLM
The USBPrg is always use .bin file as default. We can added a setting option on this point.
I would like that very much as i always use *.hex files myself
Thanks DD |
| ZLM |
Posted - 06/21/2009 : 16:53:56
The USBPrg is always use .bin file as default. We can added a setting option on this point.
|
| busterk |
Posted - 06/21/2009 : 12:54:12
quote:
Originally posted by ZLM
Can you try it again on smaller program again?
I just want to confirm the problem can be reproduced.
I found a workaround , i just erase the code and write new code
now the CFG is unchanged and i can use the pic again.
But using the read /wrte CFG dint work as i hoped it would.
Can i Change the default load file in USB Prog
to *.hex and not *.bin.?
|
| ZLM |
Posted - 06/20/2009 : 23:21:57
Can you try it again on smaller program again?
I just want to confirm the problem can be reproduced. |
